Instructions

CHARGING THE PROJECTOR
Before using the projector, connect it to the charger and allow it to fully charge.
Always use the original charger that was provided to ensure proper charging.
If the red indicator LED light is flashing, th is means that the battery is low.
Wh ile the projector is charging, the indicator LED will be a solid red light. Once
charging completes, the indicator LED will change to a solid white light.
POWERING THE PROJECTOR ON/OFF
To turn the projector on or off, hold the power button on the side for three (3)
seconds. Once powered on, tap the power button lightly to display the remain-
ing battery percentage on the screen.
ADJUSTING THE FOCUS
If the image on the screen appears fuzzy or unfocused when you turn the pro-
jector on, use the focus wheel on the side to correct the image. Turn the wheel
up or down unt il the image appears sharp and clear.
NOTE: If a specific image or video remains fuzzy after adjusting the focus
wheel, try pressing and holding the confirm button to return to the main menu.
If the main menu graphics appear clear and the image is still fuzzy, the problem
may be the image or video quality.
EN l8