User Manual

20 21
EN | | EN
computer. If this is the irst time you are connecting, it may take your computer a
few moments to ind the correct drive.
FORMATTING YOUR SD CARD
Important: Formatting your SD Card will delete all iles on that card. Please
save iles you wish to keep to your computer before formatting.
If the SD Card you use is not compatible, you will need to format it using your
computer.
1. Use the Type-C USB Cable to connect the scanner to your computer’s USB port.
2. Make sure your scanner and computer are both powered on.
3. From the scanner’s Home Page, select the USB Upload
Icon
4. Press OK/Scan to complete the connection.
5. Find the Removable Disk on your computer (usually E: or F:) and right click on it.
6. Select “Format.”
SETTING THE DATE AND TIME
Setting the Date and Time allows you to manually label the image with the date the
photo was taken or scanned. This setting is not a running calendar or clock.
You can set the Date and Time of an image before scanning it. The Date and Time
will not be printed on the scanned image, but it will be stored in the image’s
electronic ile.
To set the Date and Time:
1. Go to the scanner’s Home Page, and use the Arrow buttons select the Date and
Time
Icon. Press OK/Scan to conirm.
2. You will see a Date and Time adjustment table.
3. Press the Playback
button to select your desired item
4. Use the arrow keys to adjust the number you are setting.
5. Press OK/Scan to conirm your selection and return to the Home Page.
TIPS FOR BEST IMAGE QUALITY
• Before loading ilm into the scanner, use the cleaning wand and gently insert it
into the ilm slot to clean o the lens and backlight panel.
• Ensure that your negatives, slides, and cover trays are clean before use.
• Dust or dirt can aect the quality of your scanned images.