KODAK SCANZA DIGITAL FILM SCANNER User Manual 4.7"W | 4.7"H | 5"D (120 x 120 x 127mm) Please read all directions before using the product and retain this guide for reference. KO17-007 Film Scanner RODFS35 Manualv5.
KO17-007 Film Scanner RODFS35 Manualv5.
CONTENTS 1 INTRODUCTION 5 2 FEATURES 5 3 BOX CONTENTS 6 4 SAFETY PRECAUTIONS 6 5 TIPS 7 6 OPERATING INSTRUCTIONS A. CONTROLS B. PREPARING MEDIA TO SCAN C. OPERATION 7 CAPTURE MODE A. COLOR & BRIGHTNESS ADJUSTMENT 8 GALLERY MODE 8-12 8 9-11 12 13-15 14-15 15 A. ROTATE IMAGE 16 B. FLIP IMAGE 16 C. DELETE IMAGE 17 D. SLIDESHOW 17 9 SETTINGS 18-26 A. FILM TYPE 18-20 B. RESOLUTION 20-21 C. LCD BRIGHTNESS 21-22 D. USB UPLOAD 22-23 E. FILM TRAY 23-24 F. MEMORY 24-25 G.
10 SPECIFICATIONS 11 CUSTOMER SERVICE CONTACT INFORMATION 12 WARRANTY 26 27 27-30 4 KO17-007 Film Scanner RODFS35 Manualv5.
1. INTRODUCTION Thank you for purchasing the KODAK SCANZA Digital Film Scanner. This User Guide is intended to provide you with guidelines to ensure that operation of this product is safe and does not pose risks to the user. Any use that does not conform to the guidelines described in this User Guide may void the limited warranty. This product is intended for household use only. This product is covered by a limited warranty and is subject to conditions and exclusions.
3. BOX CONTENTS Digital film scanner Video cable AC adapter 3 Adapter trays HDMI cable Cleaning brush 3 Inserts USB cable User guide Warranty card 4. SAFETY PRECAUTIONS • Important: Do not expose this product to liquids or high humidity. • Do not handle this product with wet hands. Risk of electric shock. • Warning: Do not attempt to disassemble or alter this unit. This device contains no user-serviceable parts. • Do not block any ventilation openings.
5. TIPS • Place the scanner on a flat, stable surface with the LCD display facing you. • Use the included cleaning brush to clean the backlight, adapter, or insert. Insert the brush — CLEANING PAD SIDE DOWN — into the adapter opening on the bottom of the unit. Gently wipe the inside bottom of the unit. Never use alcohol, detergents, or abrasive cleaning agents to clean this device. • Always remember to save your scanned image before inserting another slide or negative into the scanner.
6. OPERATING INSTRUCTIONS NOTE: Illustrations are for instructional purposes only, and may be different from the actual product. 4 1. Function Keys 1 2 3 5 2. Power On/Off Button 3. Capture Button 4. Tilt-up LCD Screen 5. Home Button 6A. CONTROLS 1. Function keys (soft keys): The function is indicated by the text that will appear on the screen above the corresponding key. 2. Power button: Press and hold to turn the device on and off. 3.
6B. PREPARING MEDIA TO SCAN Before using your film scanner, you must insert an SDTM card (not included) or the unit will not operate. There is no built-in memory. Load your film/slide into the appropriate adapter and insert according to the Tray Directory below. (Table can be found onscreen at Home>Settings>Film Tray). Each adapter tray and insert is clearly marked and numbered. KO17-007 Film Scanner RODFS35 Manualv5.
TRAY DIRECTORY FILM TYPE FILM TYPE ADAPTER NEEDED INSERT NEEDED Negative Color Negative 135 No. 2 None Color Negative 126 No. 1 None Color Negative 110 No. 2 No. 5 Slide Slide Positive 135 No. 1* None Slide Positive 126KPK No. 1* None Slide Positive 110 No. 1* No. 6 Slide Positive Super 8 None No. 4 Slide Positive 8MM None No. 4 Black & Black & White 135 No. 2 None White Black & White 126KPK No. 1 None Black & White 110 No. 2 No.
KO17-007 Film Scanner RODFS35 Manualv5.indd 11 Flip up the top cover of the adapter. Place insert with your slide or film into adapter. This film scanner features speed-load adapters to make scanning easy and straightforward. Simply push them into the device until you hear a click, and you can feed in slides or negatives one after the other without needing to remove and reload the adapters.
6C. OPERATION Upon powering on, and before displaying the HOME screen, the screen displays the currently selected film type, adapter, and insert information for 5 seconds and then brings up the capture mode screen. HOME SCREEN The Home screen will appear when the unit is powered on, whenever the Home button is pushed, and any time SAVE/EXIT is selected. Note: There is a difference between SAVE/EXIT and SAVE/BACK. SAVE/EXIT takes you back to the Home screen.
7. CAPTURE MODE 1. Press the soft function key under the Capture icon on the screen to go to the capture mode. Your loaded image will appear on the LCD screen. The status bar on the top, indicating the active mode and settings, will disappear after 15 seconds. Press any of the function keys to bring back the status bar. • The underlined text indicates the highlighted setting. The highlighted setting can be accessed by pressing the Select button.
4. The Color Adjustment screen will appear. • Press the right function key (“Info”) to review your film type, adapter and insert. • Press the center function key (“Select”) to adjust color and brightness. • Press the left function key to return to the image and then press “Select” to go back to the capture mode. Home 7A. COLOR AND BRIGHTNESS ADJUSTMENT To adjust brightness and color, press the center soft function key (“Select”). “Brightness” will be highlighted in the status bar.
For each setting (R, G, B) a scale will appear at the bottom of the screen. Press the center function key (“Adjust”) to adjust each color, then press the function keys under the decrease (–) and increase (+) symbols. Press the center key again (“Save/Back”) to save your selection. Use the right key (down arrow) to navigate each color setting. Home Home Home Note: The color adjustment resets to the default setting “0” after the film scanner has been restarted. 8.
8A. ROTATE You can rotate the image left or right. To select an image to rotate: 1. Enter gallery mode as described above. 2. Use the left < and right > function keys to scroll through images. 3. To rotate the image, press the center soft key (select). Then press the right soft key to cycle through the editing options listed at the top of the screen (Rotate, Flip (>|<), Delete, and Slideshow). Home 8B. FLIP IMAGE You can flip the image vertically or horizontally.
8C. DELETE To delete an image, navigate the top status bar to display the trash can icon. Press the center function key to “Select.” You will be asked to confirm if you want to delete that image. Home 8D. SLIDESHOW View stored images in succession. In the slideshow mode you can pause (||) or play (>) by pressing the center function key. KO17-007 Film Scanner RODFS35 Manualv5.
9. SETTINGS MODE From the Home screen, select Settings by pressing the soft function key under the Settings icon. Press the corresponding soft function key under the left < and right > arrow symbols to scroll through the settings: • Film Type • Resolution • LCD Brightness • USB Upload • Film Tray • Memory • Language Home Press the soft function key under any of the icons that appear on the screen to enter that function’s submenu. 9A.
1. Choose one of the 3 film types by pressing the center function key (“Select”). Choose Back to return to the Settings menu. Home Home 2. For each film type, select the film size. Home KO17-007 Film Scanner RODFS35 Manualv5.
3. Once the film type and size are selected, a confirmation screen will appear with directions. Press Save/Exit to save and return to the Home screen. 4. Repeat the process to change film types or sizes. From the Settings menu, continue to select additional settings from the submenus. Press the function key under “Save/Exit” after each selection. Note: Selecting “Save/Exit” will redirect you back to the Home screen. Home 9B. RESOLUTION 1. Select Resolution from the settings menu. 2.
3. Select the desired setting by pressing the Save/Exit button. Note: This will then take you back to the Home screen. 4. To go to the previous slide, press the Back button. Home 9C. LCD BRIGHTNESS 1. Select LCD Brightness from the settings menu. 2. Use the + and – keys to adjust the brightness of the LCD screen. KO17-007 Film Scanner RODFS35 Manualv5.
3. To confirm your selection, press the Save/Exit button. Note: This will then take you back to the Home screen. Home 9D. USB UPLOAD This mode will allow you to access your SD™ card (not included) from your computer. Note: While connected to a computer, you will be unable to use the film scanner. 1. Use the included USB cable to connect the scanner directly to a computer. 2. Select USB Upload from the settings menu. Home 22 KO17-007 Film Scanner RODFS35 Manualv5.
3. Wait for the scanner to connect to the computer. This may take a few seconds. When connecting, your computer will recognize the scanner as an external device. 4. When finished, press the disconnect button and then unplug the USB cable. 9E. FILM TRAY 1. Select Film Tray from the settings menu. KO17-007 Film Scanner RODFS35 Manualv5.
2. From the Tray Directory, you will be able to see which adapter you need for each compatible film or slide type. Note: The film type cannot be actively changed from the Tray Directory. To change the film type, select Film Type from the Settings menu, as described in section 9A of this user manual. Home 9F. MEMORY 1. Select Memory from the settings menu. Home 24 KO17-007 Film Scanner RODFS35 Manualv5.
2. You will be able to see the currently used and available space on the inserted SD™ card (not included). The image count is approximate and may not be an exact reflection of available space. Note: This film scanner is not equipped with internal memory and an SD™ card (not included) must be inserted in order to save photos. Home 9G. LANGUAGE 1. Select Language from the settings menu. KO17-007 Film Scanner RODFS35 Manualv5.
2. Cycle through the available languages using the arrow buttons. To confirm your selection, press the Save/Exit button. Note: This will redirect you back to the Home screen. Available languages include: English German French Italian Spanish Home 10. SPECIFICATIONS Power source: AC adapter, USB DC5V output Sensor: 14MP CMOS sensor File format: JPEG Resolution: 14MP/22MP interpolation Supported film/negative types: 135mm, 126, 110, Super 8, 8mm LCD: 3.
11. CUSTOMER SERVICE CONTACT INFORMATION Should you experience any problems with your product, please contact us before returning the item to the place of purchase. We’re here to help! U.S. Support: kodak@camarketing.com, 844-516-1539 International Support: kodakintl@camarketing.com, 844-516-1540 12.
EXCLUSIONS AND LIMITATIONS The Company warrants the Product against defects in materials and workmanship under normal use for a period of ONE (1) YEAR from the date of retail purchase by the original end-user purchaser (“Warranty Period”).
This Warranty is valid only in the country where the consumer purchased the Product, and only applies to Products purchased and serviced in that country. This Warranty does not cover images “burnt” into the screen. The Company does not warrant that the operation of the Product will be uninterrupted or error-free. The Company is not responsible for damage arising from your failure to follow instructions relating to its use.
NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS, BUSINESS, SAVINGS, DATA OR RECORDS) CAUSED BY THE USE, MISUSE OR INABILITY TO USE THE PRODUCT. Nothing in these terms shall attempt to exclude liability that cannot be excluded under applicable law. Some countries, states or provinces do not allow the exclusion or limitation of incidental or consequential damages or allow limitations on warranties, so certain limitations or exclusions may not apply to you.
KO17-007 Film Scanner RODFS35 Manualv5.
The Kodak trademark, logo and trade dress are used under license from Kodak. SD is a trademark of SD-3C LLC in the United States, other countries or both. Mac is a trademark of Apple Inc., registered in the U.S. and other countries. Distributed by: C&A Marketing, Inc., 114 Tived Lane East, Edison, NJ 08837 USA C&A Marketing UK LTD, 167 Hermitage Road, Crusader Industrial Estate, London N4 1LZ, UK ©2017, C&A Marketing LTD. All Rights Reserved. Made in China. KO17-007 Film Scanner RODFS35 Manualv5.
