User manual

40
Settings of Smart Device:
1. Enable the Wi-Fi® of smart device and then search
surrounding wireless devices.
2. Select the name of camera SSID to be connected
and then input the eight-digit number password
after WPA2PSK on the camera.
3. Click the icon of the PIXPRO Remote Viewer APP
to enable the APP.
Set up completion:
Once the APP is connected to the camera, functional
operation can be enabled on the connected smart
device.
Every WPZ2 camera is shipped with a default
factory Wi-Fi® password that is randomized
and unique to that camera and will not change
unless you wish to reset the password with a
new randomly generated password. If you wish
to change the Wi-Fi® password in your WPZ2
from the assigned, unique factory password,
you can do so by selecting and using the
refresh setting. If “refresh” is selected, a new
random password will be generated and saved
in the camera until changed or if you use the
“Reset” function. If you reset your WPZ2 to
the factory settings, then the initial, randomly
factory assigned and unique Wi-Fi® password
will be restored to your camera. (Please refer to
Reset instructions on page 88).
Station
Enable image transmission and remote control by
connecting the camera with a Wi-Fi® access point
created by your smart device.
1. Enable the Wi-Fi® access point of smart device.
2. Select the on camera and then press the
button to conirm connection with smart
device.
3. Press the up/down buttons to select the name
of smart device to be connected and then press
the button to conirm. Then, the camera
enters the password input interface.
Station
Wi-Fi Mode
Device1-SSID
Device2-SSID
Device3-SSID
Searching for devices.
*SSID
6FDQ%DFN