User manual

Flat Adhesive Mount: For tacking onto a skateboard or other at

objects

Installation method:

Therearetwotypesofadhesivemounts:atandcurved.Youmayselectbasedontheshapeoftheobjecttobe

used.

Bothtypescanbeassembledinthesameway,taketheadhesivemount(at)asanexample:

1. Assemble the adhesive mount or the waterproof housing ( 36 / 37).

2. Tie one end of the rope to the adhesive mount and the other end to the standard or waterproof housing.

3. Assemble the adapter, pre-tightening the nut and adhesive mount according to the direction illustrated in the

picture. First press the adapter into the adhesive mount and then rotate and tighten the pre-tightening nut.

4. Tack the double-sided adhesive at the bottom of the adhesive mount to the object to be used.

The double-sided adhesive is disposable. It should be replaced by a new one after being peeled off.

Curved Adhesive Mount: For tacking onto a helmet or other curved

objects

Pre-tightening nut

Adhesive Mount

Adapter

Double-sided adhesive