User manual
28
Using Interfacing
Micro USB interface
Charging
13
Using an external power supply
In case of low battery power, or when a long-term power supply is needed, an external power supply (AC adapter, vehicle power supply, portable power supply or other
power unit) can be used instead of a battery. At this time, the setting of functions, photography, and other operations can be performed.
When powered on, use the Micro USB cable to connect the Action Cam to an external power supply. When connected with an external power supply, " " will be
displayed on the LCD.
When powered off, use the Micro USB cable to connect the Action Cam to the external power supply. Press and hold the button to power on. When connected to an
external power supply, " " will be displayed on the LCD.
Requirements for the external power supply: output power of 5 V, output current of 1 A.
When powered on with a battery inserted, press and hold the button to shut down and it starts to charge the battery.
If the Action Cam was set to the Loop recording mode before shutdown, it will automatically start up and start recording when a Micro USB cable is connected to the
Action Cam and an AC adapter (or to an external power supply). (For example: when the Action Cam is connected to a vehicle power supply, it will start and record
automaticallywhentheautomobilestarts.Itwillalsostoprecording,savetheles,andpoweroffoneminuteaftertheautomobileshutsdown.)
Data transmission
UsetheMicroUSBcabletoconnecttheActionCamtoacomputerandcopylesfromtheActionCamtothecomputer.
The steps are as follows:
1. Use the Micro USB cable to connect a computer (the computer should be on) to the Action Cam. During the connection, the Action Cam will display "Connecting ...", and
the computer will automatically detect the Action Cam.
2. OpentheActionCamfolderonthecomputertocopyyourlestothecomputer.Afterthetransmissioniscompleted,pleaseunplugtheUSBcableinasafemanner
accordingtothecomputer'ssettings.










