User manual
25
Connect Action Cam to smart device with NFC
1. Enable NFC mode on your smart device.
2. Use your smart device to slightly touch the NFC mark on the Action Cam; if
the smart device has a prompt tone or vibration, it means the connection is
successful.
3. The APP will open automatically on your smart device.
TheNFCfeaturewillonlybeavailablewhenyoursmartdevice'sscreenis
unlocked.
After having a successful connection of your smart device with an Action Cam,
if you use a different Action Cam to touch the same smart device, the previous
connection will be replaced.
When recording is started via the App, the Recording interface will appear on
the Action Cam.
If you wish to stop recording, you can do so using the APP or by pressing the
button disconnect. After pressing the or button to select ,
press the button to enter the wait for the connection interface.
If the Wi-Fi connection is cut off while recording, the Action Cam will continue to
record and enter the connectionless recording interface. If you wish to stop the
recording, press the button to select whether or not to stop recording. After
pressing the or button to select , press the button to enter
the wait for the connection interface.
The Wi-Fi will automatically disconnect if you do not touch the smart device
screen within three minutes after starting to record. However, the Action Cam
will continue recording.