User manual

Connect Action Cam to smart device (or PC) with Wi-Fi.

When in Wi-Fi mode, press the button to immediately disconnect and exit

Wi-Fi mode.

1. Action Cam:

CheckSSID(ServiceSetIdentier)(PIXPRO-SP360_XXXX)andpassword

(initial password: 12345678) indicated on the label in the battery compartment

of the Action Cam. In the main interface, press the button to switch to Wi-Fi

mode. The Action Cam will enter the waiting for connection interface after starting

Wi-Fi connection one second later:

If you wish to turn off Wi-Fi, press the button in order to choose whether

or not to turn off Wi-Fi. After pressing the or button to select ,

press the button to exit Wi-Fi mode.

2. Smart Device or PC:

Enable Wi-Fi mode, it will automatically search the nearby Wi-Fi hotspots. Select

theonewiththesameSSID(PIXPRO-SP360_XXXX)andinputthepassword.

3. Action Cam:

When the Wi-Fi connection is successful, enter the Wi-Fi connection interface.

If you wish to disconnect, press the button. After pressing the or

button to select , press the button to enter the wait for the

connection interface. If you would like to exit WiFi completely, press the

button.

4. Smart Device or PC:

When connected via Wi-Fi, you can tap the App icon on the smart device to

start it; or double-click the App icon on the desktop of the computer to start

it.

5. Action Cam:

When the App is connected to the Action Cam the App connected interface will

appear.

If you wish to disconnect, press the button. After pressing the or

button to select , press the button to enter the wait for the

connection interface.If you would like to exit WiFi completely, press the

button.