User Manual
BEFORE YOU START Declaration of Conformity Responsible Party: JK Imaging Ltd. Address: JK Imaging Ltd., 17239 South Main Street, Gardena, CA 90248, USA JK Imaging Europe, 71 Clarendon road, Watford, WD17 1DS, UK Company Website: www.kodakpixpro.com For Customers in the U.S.A. Tested to Comply with FCC Standards FOR HOME OR OFFICE USE This device complies with part 15 of the FCC Rules.
About this Manual Thank you for purchasing this KODAK PIXPRO digital camera. Please read this manual carefully and keep it in a safe place for future reference. JK Imaging Ltd. reserves all rights of this document. No part of this published manual may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form, by any means, without the prior written permission of JK Imaging Ltd..
SAFETY NOTES Safety notes for this camera Do not drop the camera or allow it to hit solid objects. Do not attempt to disassemble the camera. To prevent the camera from being damaged by moisture, do not use or store the camera in very humid environments, such as in rain or near bodies of water. Do not use or store the camera in dusty places or on a beach to prevent dust or sand from entering the camera, causing possible damage to it.
Safety notes for battery If battery fluid leaks inside the camera, contact our customer service department. If battery fluid leaks onto your skin, rinse your skin with clean water and seek immediate medical attention. Disposal of used batteries should be carried out in accordance with the local (national or regional) regulations. To prevent the battery from being damaged, do not drop the battery or allow it to hit solid objects or to be scratched by the objects.
When the camera is stored for a long period of time, be sure to download your photos and remove the memory card. Store it in a dry environment. Other Safety Notes Format the memory card using the camera before you use it or insert a new one. Do not disconnect the power or turn the camera off during the update process. Doing so may cause incorrect data to be written and the camera may not power on later. We suggest buying only well-known, name brand memory cards to ensure peak performance.
CONTENTS BEFORE YOU START..............................1 SAFETY NOTES......................................3 CONTENTS..............................................6 Resetting Date/Time..................................18 MODE OVERVIEW............................... 19 Display Setting.................................................19 GETTING READY................................. 10 LCD Screen Display.........................................20 Accessories Included.......................................
Panorama Mode...............................................25 Thumbnail View................................................35 Scene Mode ....................................................26 Using Zoom Playback (for still pictures only)...36 Auto Scene Mode......................................28 Slideshow.........................................................37 Photos and Video Deletion...............................38 BASIC OPERATION.............................. 29 Flash Mode..................
8 Photo Shooting Setting Menu..........................44 Playback Setting Menu....................................51 Quality........................................................44 Protect.......................................................52 AF-Assist Beam.........................................45 Delete........................................................52 Digital Zoom...............................................45 DPOF (Digital Print Order Format)............53 Date Imprint.........
Copy to Card..............................................58 Using the PictBridge Menu...............................67 File Numbering..........................................59 Print (with Date).........................................68 Reset.........................................................60 Print (without Date)....................................69 FW Version................................................61 Print Index..................................................
GETTING READY Accessories Included Your camera box should contain the camera model you purchased along with the following accessories. If anything is missing or appears to be damaged, please contact your retailer.
Part Names 1 Flash Lamp 6 Zoom Button 11 Delete Button/Arrow Button (Down) 2 AF Assist Beam/Selftimer Lamp 7 Status Indicator 12 Macro Button/Self-timer Button/ Arrow Button (Left) 3 Lens 8 Playback Button 13 SET Button 4 Microphone 9 Display Button/Arrow Button (Up) 14 Menu Button 5 LCD Screen 10 Flash Button/Arrow Button (Right) 15 Mode Selection Button 11
12 16 Strap Eyelet 19 Fast Video Recording Button 22 Battery Cover 17 USB Port 20 Power Button 23 Tripod Socket 18 Shutter Button 21 Speaker
Installing Battery and Memory Card 1. Open the battery cover. 2.
3. Insert the memory card into the memory card slot as shown in the diagram below: Write protection buckle The memory card (SD/SDHC) is optional and not included in all camera packaging. If you have to purchase a memory card, select one with storage capacity between 4GB and 32GB to ensure correct data storage. To remove your memory card, open the battery cover, gently press the memory card to eject it and remove it carefully. 14 4. Close the battery cover.
Turning Camera On and Off Press the Power button to turn the camera on. To turn the camera off, press the Power button again. Power Button Symbol Description In the instructions below, the following symbols may be used throughout this manual on how to operate the camera. This is to facilitate better understanding. 「Item properties」: The optional properties in the camera interface are indicated by the symbol「 」.
Set your Language, Date/Time Set your Language, Date/Time after the first power-on 1. When you turn the camera on for the first time, the language selection screen appears. 2. Press the arrow buttons to select your desired language. 3. After you press the button to confirm the selection, the Date/Time settings screen appears. 4. Press the left/right arrow button to select the Date/ Time to be adjusted: Time is displayed in YYYY. MM.DD HH:MM. 5.
Resetting your Language After you set your language for the first time, follow the instructions below to reset your language. 1. Press the Power button to turn the camera on. 2. Press the button, press the up/down arrow button to select , and press the button to enter the menu. 3. Press the up/down arrow button to select , and press the button or right arrow button to enter the menu. 4. Press the up/down arrow button to select 「Language」and press the button or right arrow button to enter the menu. 5.
Resetting Date/Time After you set your Date/Time for the first time, follow the instructions below to reset date and time. 1. Press the Power button to turn the camera on. 2. Press the button, press the up/down arrow button to select , and press the button to enter the menu. 3. Press the up/down arrow button to select , and press the button or right arrow button to enter the menu. 4. Press the up/down arrow button to select 「Date & Time」and press the button or right arrow button to enter the menu. 5.
MODE OVERVIEW Display Setting Press the Full, Off. button to display the settings: Classic, Off: Does not display any additional icons on screen Classic: Displays the camera parameters on screen SD x 1234 16M 00:56:00 -0.3 EV 400 ISO Full: Camera parameters with Grid and Histogram SD x 1234 16M 00:56:00 -0.
LCD Screen Display Overview of the screen Icons in photo shooting mode 7. Color Effect (Adjustable in 8. Number of Remaining Shots SD x Mode) 9. Image Size 10. Video Quality 1234 16M 15 -0.3 EV 400 ISO 13. Exposure Compensation (EV value) (Adjustable in Mode) 14. Focus Frame 1. Shooting Mode Icons 15. Shutter Speed 2. Macro Mode 16. Histogram 3. Zoom Display (Visible when pressing the Zoom Button) 17. Aperture Value 4. SD Memory Card/Built-in Memory 19. Continuous Shot 5.
Overview of the Screen Icons in Movie Mode 4. Remaining Recording Time 5. SD Memory Card/Built-in Memory SD x 6. Battery Status 7. Video Quality 8. Exposure Compensation (EV value) 00:56:00 -0.3 EV 9. Focus Frame 10. Self-timer 11. AF Mode 1. Movie Mode Icons 2. Macro Mode 3. Zoom Display (Visible when pressing the Zoom Button) For optimal video shooting, it is recommended that an SDHC memory card be used.
Overview of the Screen Icons in Playback Mode 1. Film File 2. DPOF File 3. File Protection 1/45 SD 4. Memory Space (indicating the current number of photos and total number of photos) 5. SD Memory Card/Built-in Memory 6. Battery Status x2 00:01:23 2014 01-01 15:37 7. Slide Setting/Film Playing 8. Zoom Magnification Area 9. Shooting Date 10. Film Length/Number of Photos with Burst Shooting 11. Video Quality 12.
Using the Mode Selection Button This camera provides a convenient Mode Selection Button that allows you to switch easily between different modes. All the available modes are listed as follows. Mode Name Icon Description Manual Mode Many of the camera settings can be configured manually in this mode. Auto Mode In this mode, the optimal conditions for taking pictures will be set based on the subject and environment. It is the most commonly used mode for taking pictures. Movie Mode Record videos.
Manual Mode When selecting set EV/ISO. 1. Press press 2. Press the Auto Mode (Manual Exposure) Mode, you can button to select Manual Mode to confirm. , Auto Mode is the easiest mode to take photos. While operating in this mode, the camera automatically optimizes numerous camera settings to adjust your photos and videos for the best possible results. Follow these steps: button. 1. Press the Power button to turn the camera on. 2. Press button to select Auto Mode ( ). 3.
Panorama Mode With Panorama Mode, you can take a series of pictures which will be stitched automatically into an ultra-wide panoramic picture by the camera. 4. After the first shot is taken, the semi-transparent image of the first shot will appear at the edge of the screen. You can use this image to compose your picture before you press the Shutter button to capture and finish manual stitching. Follow the steps below: 1. Press button to select Panorama Mode ( ). 2.
Scene Mode You can select an appropriate mode from the 23 scene modes according to the type of environment you are shooting. The camera then configures the most appropriate settings automatically. Press confirm. button to select Scene mode. Press the arrow buttons to select a scene, and press the button to Description Auto Scene Identifies the scene automatically; Portrait, Backlit Portrait, Landscape, Macro, Night Landscape, Night Portrait, Auto. Landscape For landscapes and outdoor shots.
Description Scene Glass For objects behind transparent glass. Photo Frame For adding interesting frame effects to the photo. Panning Shot Suitable for capturing fast moving objects to have a clear subject with a blurred background. Text For taking pictures of text, documents or white boards. Portrait Most suitable for capturing people with focus on their face. Fish Eye For interesting fish eye effect.
Auto Scene Mode In scene mode, the camera can detect different environments intelligently and automatically select the best scene and photo settings for you. 1. Press button to select mode, then select SD function. 2. Hold the camera steadily and aim at the subject. The optimum scene mode will be selected automatically. 1234 16M 3. Press the shutter button half-way down to focus. 4. Press the shutter button all the way down to take pictures.
BASIC OPERATION Flash Mode The Flash is used to illuminate a subject in low light or for fill-in lighting to achieve better illumination of a subject with pronounced shadows. 1. Press the right arrow button ( • Force Flash The flash will engage with each shot even if there is enough available light to take the photo without flash. • Slow Sync. This allows for night scenery photos that include people in the foreground. The use of a tripod is recommended when shooting with this setting. • Slow Sync.
Macro Mode The Macro Setting is ideal for shooting small objects or close-up photos. This mode allows you to focus on subjects very close to the camera. 1. Press the left arrow button ( Menu. ) to enter the Marco 2. Press the left/right to select the following 2 modes: • Macro Off Select this option to disable Macro. • Macro On Select this to focus on subjects 5cm from the lens. 3. Press the button to confirm the settings and exit the menu.
Self-timer Setting Use this function to take pictures at pre-set intervals. The camera shutter speed can be set for 2 seconds, 10 seconds or by smile detection. 1. Press the left arrow button ( 3. Press left/right to select the following 4 modes: • Self-timer Off Disables the Self-timer. • Self-timer 2 sec A single picture is shot 2 seconds after the Shutter Button is pressed. • Self-timer 10 sec A single picture is shot 10 seconds after the Shutter Button is pressed.
EV Setting EV function menu of the camera consists of EV adjustment (Adjustable in Mode) and ISO adjustment (Adjustable in Mode). With proper function setting, the user can take pictures with better effects. -0.3 EV 400 ISO -0.3 EV 800 ISO Please refer to manual mode on page 24 for EV setting operation steps. The adjustable range of exposure value is from EV -2.0 to EV+2.0. 32 The ISO function allows you to set the sensitivity of the camera's light sensor based on the brightness of the scene.
Using Quick Recording Using the Zoom Function Your camera is equipped with two types of zoom functions: optical zoom and digital zoom. Press the Zoom button of the camera to zoom in or out on the subject while taking pictures. In shooting mode, press the Recording short cut button to begin recording video. x Zoom Indicator 00:00:06 SD x 1234 16M 00:56:00 -0.3 EV After finishing, press the Recording short cut button or the Shutter Button to stop and store the video.
PLAYBACK Viewing Photos and Videos To view the captured photos and video clips on the LCD screen: 1. After pressing the button, the last photo or video clip taken will be displayed on the LCD screen. 2. Use the Left/Right navigation buttons to scroll through the photos or video clips stored in the internal memory or on the SD memory card. 3. To play a selected video clip, press the button to enter the Movie Playback Mode. During video playback, the operating instructions will appear on the screen.
Thumbnail View When in playback mode, press screen. on the zoom button to display thumbnail images of photos and videos on the 1. Slide the zoom lever to switch between 3x3 and 4x4 thumbnails. 2. When a 3x3 or 4x4 thumbnail is displayed, press the arrow buttons to select a picture or video clip to view. If the indicator appears on the LCD, then a movie file is currently being displayed. Press the button to restore a preview icon to its original image size.
Using Zoom Playback (for still pictures only) When playing back photos, you can also use the Zoom Button to zoom in on the photos 2 to 8 times. 1. Press the button to switch to Playback Mode. 2. Press the left/right button to select a picture to be zoomed in. 3. Press the on the zoom button to zoom in. 4. The bottom right corner of the screen will display the number of times and area of the photo zooming operation. x2 5.
Slideshow This setting allows you to view all the stored pictures as a slideshow. 1. Press 2. Press button to enter playback screen. button to enter slide option. 3. Press the left/right button to select slideshow playing or 「Cancel」 to return to the playback screen. Cancel 4. Press the button to confirm the setting.
Photos and Video Deletion In playback mode, press the down arrow button ( ) to select your photos and videos. To delete photos or videos: 1. Press the button to switch to playback mode. 2. Press the left/right arrow button to select the photos and videos to be deleted. 3. Press the down arrow button ( ) and the deletion screen is displayed. Delete One Exit 4. Press the up/down arrow button to select「Delete One」or「Exit」and press the Erased photos/video clips cannot be recovered.
USING THE MENUS Photo Setup Menu Image Size Mode: 1. In Photo Shooting Mode, press the enter the Photo Shooting Menu. button to 2. Press the up/down arrow button to select the Photo Shooting Menu to be set. 3. Press the left/right arrow button to select the Photo Shooting Menu to be set and press the button to confirm. 16M 16M The size setting refers to the image resolution in pixels. A higher image resolution allows you to print that image in larger sizes without degrading the image quality.
Cont. AF Continuous Shot Enable the continuous AF to be able to continuously focus automatically when taking pictures. Use this setting to perform continuous shooting. 16M 16M Cont. AF:Off Cont.AF: Off There are 2 options: • Off • On Setting Continuous AF to On will reduce battery life. 40 Single There are 2 options: • Single • Continuous Shot Press the Shutter button to start continuous shooting.
Focus Setting Color Effect In different photo shooting modes, you can select different focus methods. This setting allows you to select different modes for optimum focus. 16M Normal Single-AF There are 2 options: There are 4 options: • Single-AF: The focus frame appears on the center of the LCD screen to focus on the subject. • Normal • Multi-AF: The camera automatically focuses the subject in a wide area to find the focus point.
White Balance Setting Scene The White Balance Setting allows you to adjust the color temperature for different lighting sources to ensure the most accurate color reproduction. Select the scene mode under the SCN mode.
• Shooting menu in the shooting mode (O: Optional X: Not optional) Shooting Modes Options Image Size O O X O Cont.
Photo Shooting Setting Menu Mode: Quality 1. Press the button in Photo Shooting Mode and press the up/down button to select . The Quality Setting can be used to adjust the image compression ratio. ਘ⥺गٵ੫ Press SET to Enter Press SET To Enter Menu MENU 2. Press the button to enter the menu. 3. Press up/down arrow button to select , and press the button or right arrow button to enter the menu. 4.
AF-Assist Beam Digital Zoom In a darker environment, AF Assist Beam can be turned on for better focus. Turn on or off the digital zoom.
Date Imprint Quick Review Include a Date/Time stamp on the photo image. This option allows quick review of the photos immediately after they are taken. Each photo is displayed on the LCD screen based on the selected time. There are 4 options: • Off • 1 sec • 2 sec There are 3 options: • 3 sec • Off • Date • Date / Time 46 A shorter quick review time will improve battery life.
Movie Menu Video Quality Mode: 1. Press the press the button, select the mode and button to enter the Movie Menu. Set the image resolution used during video recording. Size: 720p 30fps Size: 720p 30fps 2. Press the up/down arrow button to select the Movie Menu to be set. 3. Press the left/right arrow button to select the Movie Menu to be set and press the button to confirm. The speed requirements for reading and writing high image pixel images to SD card are as follows: No.
Movie Setting Menu Mode: 1. Press the press the button, select the mode and button to enter the Movie Menu. 2. Press the up/down arrow button to select press the button to enter the menu. Digital Zoom Turn on or off the digital zoom. , and Press SET to Enter Press SET To Enter Menu MENU There are 2 options: 3. Press up/down arrow button to select , and press the button or right arrow button to enter the menu. 4.
Playback Menu 1. Press the button to display the playback screen and press button to enter the menu. 2. Press the up/down arrow button to select the playback to be set and press 3. Press the left/right arrow buttons to select an option and press the button to enter. button to confirm. Press SET to confirm Red-Eye Reduction Refer to the following pages for more details about each setting.
Red-Eye Reduction Rotate Use this setting to remove red eye in your photos. You can use this setting to change the orientation of the picture. Red-Eye Reduction Turn Right There are 2 options: • Red-Eye Reduction • Cancel There are 3 options: • Turn Right • Turn Left • Cancel Videos and panoramic pictures cannot be rotated. The rotated picture file will replace the original photo.
Playback Setting Menu 1. Press the select . 2. Press the button to show the playback screen, press the button, and press the up/down button to button to enter the menu. Press SET to Enter Press SET To Enter Menu MENU 3. Press up/down arrow button to select , and press the button or right arrow button to enter the menu. 4. Press the up/down arrow button to select the item to be set and press the enter the menu. 5.
Protect Delete To prevent any pictures or videos from being accidentally erased, use this setting to lock one or all of the files. You can delete one or all photo/video files. There are 3 options: • One: Lock the selected photo or video if they are unprotected; unlock the selected photo or video if they are protected. • All: Lock all photos or videos. • Reset: Cancel all locked photos or videos. There are 2 options: • One: Delete one photo or video. • All: Delete all photos or videos.
DPOF (Digital Print Order Format) Trim The DPOF feature allows you to compile and select a group of pictures that you would like to print and will save your selection on the memory card so that you can use the SD memory card to print without having to individually specify the photos you want to print. The Trim Setting allows you to crop photos and save them as new pictures. 1. Press the up/down arrow button to select「Trim」 and press the button or right arrow button to enter the menu. 2.
Setup Menu 1. Press the 2. Press the button in any mode and press the up/down button to select 3. Press up/down arrow button to select , and press the button or right arrow button to enter the menu. 4. Press the up/down arrow button to select the item to be set and press the enter the menu. 5. Press the up/down arrow buttons to select an option and press the Refer to the following pages for more details about each setting. 54 . button to enter the menu.
Sound Settings Power Saver To change this setting: This setting allows you to save power and get the maximum possible running time for your camera's batteries. Follow the steps below to turn the LCD screen and camera off automatically after a consecutive period of inactivity. 1. Select「Sound Settings」in the basic settings menu. Press the button or right arrow button to enter the menu. 2. Press the left/right arrow button to select an option. 1. Select「Power Saver」in the basic settings menu.
Language Refer to the “Reset your language” section on page 17. World Time The Zone setting is a useful function for your overseas trips. This feature enables you to display the local time on the LCD screen while you are abroad. 1. Select「World Time」in the basic settings menu. The World Time screen appears. 2. Press the up/down to select the departure place ( ) and destination ( ) fields. 3. Press the left/right arrow button to select a city located in the same time zone as that of the field.
File / Software Format Please note: formatting enables you to delete all contents in the memory card and built-in memory, including protected photo and movie files. To use this setting: 1. Press the button, press the up/down arrow button to select and press the button to enter the menu. 2. Press up/down arrow button to select and press the button or right arrow button to enter the menu. 3. Press the up/down arrow button to select「Format」 and press the button or right arrow button to enter the menu. 4.
Copy to Card Use this setting to copy the files stored in the internal memory to an SD memory card. 1. Press the button, press the up/down arrow button to select 2. Press up/down arrow button to select and press the and press the 3. Press the up/down arrow button to select「Copy to Card」and press the enter the menu. 4. Press the up/down arrow buttons to select「Yes」or「No」and press the button or right arrow button to button to confirm.
File Numbering After you take a picture or video clip, the camera will save it with a sequential number. You can use this to reset the file numbering to 1. 1. Press the button, press the up/down arrow button to select 2. Press up/down arrow button to select and press the and press the button to enter the menu. button or right arrow button to enter the menu. 3. Press the up/down arrow button to select「File Numbering」and press the enter the menu. 4.
Reset Use this setting to restore the camera to its original factory default settings. 1. Press the button, press the up/down arrow button to select 2. Press up/down arrow button to select and press the and press the 3. Press the up/down arrow button to select「Reset」and press the menu. button or right arrow button to enter the 4. Press the up/down arrow buttons to select「Yes」or「No」and press the 60 button to enter the menu. button or right arrow button to enter the menu. button to confirm.
FW Version Use this setting to view the current camera firmware version. 1. Press the button, press the up/down arrow button to select 2. Press up/down arrow button to select and press the and press the button to enter the menu. button or right arrow button to enter the menu. 3. Press the up/down arrow button to select「FW Version」and press the the menu. button or right arrow button to enter 4. When there is a new firmware version in the SD card, select「Yes」to update.
CONNECTIONS Connecting to a Computer You can use a USB cable to connect the camera and copy (transmit) photos to a computer, printer or other device. Setting the USB Mode The camera’s USB port can be set to connect with either a computer or a printer. The following steps will allow you to ensure that the camera is correctly configured to connect with a PC. 1. Press the button, press the up/down arrow button to select 2. Press up/down arrow button to select and press the button to enter the menu.
Transferring files to your computer The computer will automatically detect the camera as a removable drive. Double-click the My Computer icon on the desktop to locate the removable drive and to copy folders and files in the drive to a directory on your PC as you would copy any typical folder or file. Follow the steps below to connect the camera to a computer. 1. Make sure both the camera and computer are turned on. 2. Connect one end of the supplied USB cable to the USB/AV OUT port on your camera. 3.
Video System Use this feature to switch the video system from either NTSC or PAL. 1. Press the button, press the up/down arrow button to select 2. Press up/down arrow button to select and press the and press the button to enter the menu. button or right arrow button to enter the menu. 3. Press the up/down arrow button to select「TV-System」and press the the menu. button or right arrow button to enter 4. Press the up/down arrow buttons to select「NTSC」or「PAL」and press the button to confirm.
Connecting to a PictBridge Compatible Printer PictBridge technology allows printing of the photos saved in the memory card by the printer. To find out if a printer is PictBridge compatible, simply look for the PictBridge logo on the packaging or check the owner's manual for specifications. With the PictBridge function on your camera, you can print the captured photos directly to a PictBridge compatible printer using the supplied USB cable, without the need for a PC. 3.
Connecting to your Printer 1. Make sure both the camera and printer are turned on. 2. Connect one end of the supplied USB cable to the USB port on your camera. If the camera is not connected to a PictBridge compatible printer, the following error message will appear on the LCD screen. 3. Connect the other end of the cable to the USB port on the printer.
Using the PictBridge Menu After setting the USB mode to Printer, the PictBridge Menu will appear. Press the up/down arrow button to select a menu item and press the item. button or right arrow button to enter the Refer to the following sections for more detailed information on each setting.
Print (with Date) If you have set the date and time on your camera, the date and time will be recorded and saved with each photo you take. 1. In the PictBridge menu, select「Print (with Date)」 and the screen as shown below appears. 2. Press the left/right arrow button to select a photo to be printed. 68 3. Press the up/down arrow button to select the number of copies for the currently displayed photo. 4. Press the appear. button and the following screen will 5.
Print (without Date) Use this setting to print the photos without dates on them. 1. In the PictBridge menu, select「Print (without Date)」and the screen as shown below appears. 2. Press the left/right arrow button to select a photo to be printed. 4. Press the appear. button and the following screen will 5. Select「Yes」and press the button to confirm; select「Cancel」to cancel printing. 3. Press the up/down arrow button to select the number of copies for the currently displayed photo.
Print Index Print DPOF Images You can print all photos in the camera via this function. To use DPOF printing, you must select your photos for printing using the DPOF settings beforehand. See “DPOF” section on page 53. 1. In the PictBridge menu, select「Print Index」and the screen as shown below appears. 2. Select「Yes」and press the button to confirm; select「Cancel」to cancel printing. 70 1. In the PictBridge menu, select「Print DPOF Images」and the screen as shown below appears. 2.
Exit Select「Exit」to exit the PictBridge menu. At this time, the message「Remove USB Cable!」appears on the screen. Disconnect the USB cable from the camera and printer.
APPENDICES Specifications Design and specifications are subject to change without notice. Image Sensor Lens Type 1/2.3"CCD Effective ective Pixels 16.15 Megapixels Total Pixels 16.44 Megapixels Focal Length 4.9mm (Wide) — 19.6mm (Tele) [35mm film equivalent] [27mm (Wide) — 108mm (Tele)] F number F3.0 (Wide) — F6.
Number of Recording Pixels Still Image Movie (4:3) (3:2) (16:9) 16MP: 4608×3456 10MP: 3648×2736 5MP: 2592×1944 3MP: 2048×1536 0.3MP: 640×480 14MP: 4608×3072 12MP: 4608×2592 1280×720(15/30fps), 640×480(30fps), 320×240(30fps) Image Compression Best, Fine, Normal DCF, DPOF (Ver1.1) Support Yes File Format 2MP: 1920×1080 Still Image Exif 2.3 (JPEG) Movie Movie Format: MOV (Motion JPEG), Audio: G.
LCD Display 2.
Internal Memory: Approx. 8MB Recording Media SD/SDHC Card (Up to 32GB Support) [MMC Card Not supported ] PictBridge, ExifPrint Support Yes Multi-Language Support 27 Languages Jacks AV-OUT/USB 2.0 (Micro 5 pin USB) Power 2 x AA Alkaline Battery, AA NiMH Battery [Not Included] Shooting Capability (Battery Performance) AA Alkaline Batteries: Approx. 120 shots Operation Environment Temperature: 0 ~ 40°C, Humidity: 0 ~ 90% Dimensions (W×H×D) Weight (Based on CIPA standards) Approx. 93.0×60.2×26.
Prompts and Warning Messages Message 76 Description Action Warning! Battery exhausted. The camera battery is used up. It is a warning indicating that the camera is going to shut down. Replace with new batteries. The camera will shut down in 2 seconds. Lens obstruction, Re-start Camera. The lens is jammed or some foreign object is preventing the lens from functioning properly. Turn off the camera and restart it to reset the lens. Suggest using tripod.
Message Description Action Connection Failed! Failure to connect to your PC, printer, TV Remove USB cable and retry connection Write Protect ! The SD card is locked. Remove SD card and switch the lever on the side of card to UNLOCK. The message will disappear after 2 seconds. Card Full ! Indicates that the SD card is full. Replace SD card with another that has available memory. The message will disappear after 2 seconds. Memory Full ! Indicates that the camera memory is full.
Message 78 Description Action Card is not formatted. When an error occurs in the SD card, the message "Not Formatted" appears. Format the SD card. WARNING: Formatting the SD card will erase all data on the card. Copy the data from the SD card to another storage, such as a computer. Otherwise, all data will be erased after the format. The message will disappear after 2 seconds.
Message Description Action Exceeded maximum folder number. This indicates that the SD card exceeded the maximum number of folders (999). This could cause a long read time during the camera's power up. Copy the data to your PC, format the memory card using the camera. Too many pictures for quick processing. During the playback by date, the images exceed specifications so that it is not possible to play by date. The message disappears after 2 seconds and the camera returns to the normal playback mode.
Troubleshooting Problem Camera does not turn on The battery has been depleted. The battery is not inserted correctly. Solution Recharge the battery. Correctly reinstall the battery. Camera turns off suddenly during operation The batteries have been depleted. Recharge the battery. The picture is blurred Camera shakes while taking a picture. Turn on OIS feature. The SD memory card is full. Use another memory card or delete unnecessary files.
Problem Saving data to memory card is slow Possible causes Using a memory card below Class 4 may result in slower recording times. The SD memory card has been locked. Cannot write to the memory card Too many movies to process The camera may experience trouble recording HD movies to SD cards with a rating lower than Class 4. The number of pictures or folders in the SD memory card exceed the specifications, so the playback of data folder can not be displayed.
Licensed Product The Kodak trademark and trade dress are used under license from Kodak. © 2014 by JK Imaging Ltd. All Rights Reserved. JK Imaging Ltd., 17239 South Main Street, Gardena, CA 90248, USA JK Imaging Europe, 71 Clarendon road, Watford, WD17 1DS, UK www.kodakpixpro.com Ver.
