User manual

46
Panorama Mode
This feature allows you to capture a
panoramic view that will have signiicantly
more content than a single photograph.
Follow the arrow while keeping the
camera steady to seamlessly shoot an
ultra-wide scene of up to 360 degrees.
Follow the steps below:
1. Select the panorama mode ( ) and
then press the button to conirm.
2. Press the [ ]/[ ]/[ ]/
[ ] button to select a shooting
direction. (Should you not select
the direction, the default shooting
direction is "right"). 2 seconds later, the
camera is ready to take pictures. You
can also press the button or press
the shutter button halfway down to be
ready to take pictures.
3. Compose your shot on the LCD and
half press the shutter button to focus
on the subject. After focusing, fully
press the down shutter button to
take the irst picture. At this time, the
process dialog of panorama mode
stitching appears on the screen.
0/0000F00.0
Save
Cancel
4. Rotate the camera according to the set
direction. When the range of rotation
does not exceed the range that the
camera can detect, the progress dialog
along the indication arrow partially
turns red. When it completely turns
red, panorama mode shooting is
inished.
Panoramic image can be played
back by the method of lash playing.
Please see the animation panoramic
playback on page 75.
During shooting, the lash, self-
timer, macro modes and exposure
compensation are not available.
Focus adjustment is also not available
at this time.