User manual

110
111
3. Press the [ ]/[ ] button to
select「USB」and press the button
to enter the menu.
4. Press the [ ]/[ ] button
to select「Printer」and press the
button to conirm.
USB Printer
HDMI CEC Control
Off
Exit
Set
Select
USB
PC
Printer
After the camera is reset, it will
switch to PC mode automatically
from USB mode.
See “Using the PICTBRIDGE™ Menu“
section on page 112.
PICTBRIDGE™ technology allows printing
of the photos saved in the memory card by
the printer.
To ind out if a printer is PICTBRIDGE™
compatible, simply look for the
PICTBRIDGE™ logo on the packaging
or check the owner's manual for
speciications. With the PICTBRIDGE™
function on your camera, you can print the
captured photos directly to a PICTBRIDGE™
compatible printer using the supplied
Micro USB cable, without the need for a PC.
Setting the USB Mode
The camera’s Micro USB port can be set to
connect with either a PC or a printer, the
following steps will ensure that the camera
is correctly conigured to connect with a
printer.
1. Press the button, press the
[ ]/[ ] button to select
and press the button to enter the
menu.
2. Press the [ ]/[ ] button to select
.
Connecting to a PICTBRIDGE™ Compatible Printer