ENGLISH Front View 1 2 4 3 5 4 1 OLED screen 4 LED lights 2 Quick Touch Border (right side, tap only) 5 Memory card slot - SD, SDHC, MMC, MS, xD 3 Quick Touch Border (bottom, tap and slide) NOTE: When you turn on the frame or tap the Quick Touch Borders, the screen icons appear and LED lights turn on at touch-sensitive points along the Quick Touch Borders. To use the Quick Touch Borders, see page 4. See the Extended user guide www.kodak.com/go/digitalframesupport www.kodak.
Back/Side View 8 1 2 2 3 4 5 1 USB connector (to computer) 5 DC-In (12V) 2 USB connector (to camera/USB device) 6 Volume 3 Audio In 7 Power 4 Audio Out 8 Speakers 6 7 www.kodak.
1 Getting started Attaching the power cable Your power cable may look different from the one pictured. Use the plug that accommodates your type of power outlet. Turning on your frame Power button- press and hold for 2 seconds, then release. www.kodak.
Getting started Using your frame’s Quick Touch Borders Tap lights next to buttons (No sliding here) Touch tips Tap and slide on the Quick Touch Borders* only. Tap a border to display the icons. Tap Close to dismiss them. Tap the light closest to a button to select it. Slide to highlight menus, pictures, videos, options.** Tap OK to select them. Don’t hover, borders can be sensitive.
Getting started Setting your language The language screen appears the first time you turn on your frame. Slide (or tap below slider arrows) on the bottom border to highlight your language, then tap Save. Save NOTE: Slide left/right on the lights to move up or down the list. ■ To change the language at a later time: ■ Tap (Home) → (Settings) → Language. The language screen appears. Slide to highlight your language, then tap Save.
Getting started Inserting a memory card ■ To insert a card, push the card firmly into the slot until it stops. xD MultiMedia Card Secure Digital Memory Stick ■ To remove a card, push in the card to release it. IMPORTANT: Do not insert a micro or mini memory card without an adapter. Connecting a digital camera or other USB device USB devices: camera, flash drive, card reader, etc. (sold separately) USB cable included with your USB device 6 www.kodak.
2 Setting up for wireless operation If you have problems with your wireless setup or connection, see Troubleshooting starting on page 22. Or open KODAK EASYSHARE Digital Display Software on your computer (see page 11) and click Tools → Wireless Troubleshooter. Follow the automated troubleshooting wizard. Connecting to your wireless network To allow your frame to access the contents of your computer wirelessly, connect your frame to your wireless home network.
Setting up for wireless operation Available wireless networks are listed. NOTE: If the scan finds multiple networks, your home network (with the highest % signal strength) is usually listed first and highlighted. Or, to select another network, slide or tap below the arrows to highlight a network, then tap OK. Tap Back to dismiss the screen and connect later. → Settings → Network → Scan for Later—To connect later, tap Home wireless networks. Then follow the screen prompts and continue with step 2 below.
Setting up for wireless operation security key (WEP or WPA) on the on-screen keyboard. Slide along the bottom of the touch border (or tap below slider arrows) to highlight a character then tap (Select) to enter it in the text box. Tap Done when finished. Navigation tip: Keep sliding (or tapping arrows) left/right to go to the previous or next row. Backspace - erases text Text box Slider arrows Select NOTE: The screen identifies your security as either WEP or WPA.
Setting up for wireless operation Installing the software The CD that was packaged with your frame contains two applications that work well independently, but also work together for the best experience with your frame: ■ KODAK EASYSHARE Digital Display Software —manage your frame, copy between your frame and computer, and set up your frame for access to KODAK Gallery and Web content (page 12). KODAK EASYSHARE Software —organize, edit, and share your pictures.
Setting up for wireless operation 3 Double-click to open EASYSHARE Digital Display Software if it doesn’t open automatically. When prompted, take a few minutes to electronically register your frame and software for exclusive tips and offers. To register later, visit www.kodak.com/go/register. Using the software Install the software that was packaged with your frame (page 10) on any computer that you want your frame to connect to wirelessly.
Setting up for wireless operation Setting up access to Gallery and Web content On your computer, use EASYSHARE Digital Display Software (page 11) to set up access to Web content such as your KODAK Gallery account, frequently changing RSS (Really Simple Syndication) photo feeds, music, or videos. 1 Make sure your computer is connected to the Internet. 2 Click on your desktop to open EASYSHARE Digital Display Software.
Setting up for wireless operation Verifying computer/device connections After installing the software (page 10) and setting up access to Web content (page 12), return to the Network Connection screen on your frame (see page 8). 1 Tap Scan now. The Scanning screen appears as the frame scans your network and then lists available computers and other picture sources that your frame can access wirelessly. NOTE: Select Scan later to verify later that your frame can access available devices wirelessly.
3 Doing more with your frame Viewing the Home screen/Web content Start at the Home screen to: ■ access your pictures, videos, and music. ■ play slide shows of Web content (KODAK Gallery, Flickr, FrameChannel RSS feeds) you set up (see page 12) and preloaded ones such as weather, sports, news, etc. ■ receive pictures from your friends and family at KODAK Gallery (see page 20). ■ customize your viewing through the Settings screens. 1 Tap (Home).
Doing more with your frame Home screen icons: Pictures and videos (see page 16). Music (see page 19). KODAK Gallery—appears if you set up access to KODAK Gallery (see page 12). Display your Gallery albums and My Friends’ Albums. This icon ( ) indicates someone has shared pictures with you at the Gallery! See page 20. Web media—list of Flickr and FrameChannel RSS photo feeds you set up (see page 12).
Doing more with your frame Accessing your pictures and videos 1 Tap (Home), then (Pictures and Videos). All connected sources (see below) are displayed. 2 Slide or tap below the arrows to highlight a picture source, then: ■ Tap (Play slide show) to start a slide show of the pictures in the highlighted source. ■ Or, tap OK to view thumbnails, folders, etc. Picture sources: My Frame—the frame’s 512 MB internal memory. Copy your pictures into My Frame from a memory card or other device.
Doing more with your frame Viewing pictures and videos View pictures and videos from any connected picture source (see page 16). IMPORTANT: For wireless access, make sure you set up your frame to work with your wireless home network (see page 7). View a single picture and thumbnails To view a single, full-screen picture, highlight it in thumbnails view, then tap OK. To view your pictures as thumbnails: ■ Tap (Home) → then tap OK. ■ Or, from a slide show or single view, tap (Pictures and Videos).
Doing more with your frame Play a slide show There are two ways to start a slide show on your frame: ■ Turn on the frame, then insert a card or connect a USB device—a new slide show starts automatically, replacing a currently running slide show or single view picture. Highlight a picture (in thumbnail or single view), or highlight a picture source on the Pictures and Videos screen, then tap (Play slide show). NOTE: A slide show plays continuously until you stop it or turn off the frame.
Doing more with your frame Selecting multiple pictures Use the multi-select feature to copy or delete two or more pictures or to play a slide show of highlighted pictures. Select one at a time 1 In thumbnails view, slide along the bottom touch border to find a picture, then tap (Select). A check mark appears on the selected picture. 2 Continue selecting pictures. To remove a check mark, tap Unselect while the picture is highlighted. Select/Unselect all ■ In thumbnails view (page 17), tap Select All.
Doing more with your frame To play background music with a slide show: with a slide show playing, tap (Slide show options), then tap Background Music. Use the slider to navigate to the music or song you want to play, then tap Play. Tap (Play slide show) to resume the slide show. Automatically receiving My Friends’ Albums Your wireless frame uses the Picture Mail feature to automatically notify you ( ) when a friend shares pictures with you at the KODAK Gallery.
Doing more with your frame To see the shared pictures later: 1 When the notice appears on the frame screen, slide to choose Dismiss. 2 To see the new pictures, tap (Home), highlight (KODAK Gallery), then tap OK. Tap KODAK Gallery 3 With My Friends’ Albums highlighted, tap OK. 4 Highlight a marked album , then tap OK. You can customize how and if you receive the notifications. See the extended user guide at www.kodak.com/go/digitalframesupport. Learning more about your frame www.kodak.
4 Solving frame problems For step-by-step product support, visit www.kodak.com/go/digitalframesupport and select Interactive Troubleshooting & Repairs. Or open EASYSHARE Digital Display Software on your computer and click Tools → Wireless Troubleshooter. Troubleshooting wireless network connection Problem Possible causes and/or solutions Frame cannot connect to ■ Make sure you have a wireless router and that it is broadcasting the SSID, or enter the SSID manually.
Solving frame problems Troubleshooting frame problems If... Try one or more of the following Frame does not turn on. ■ Make sure the power cable that was included with your frame is connected securely (see page 3). ■ Press and hold the power button for 2 seconds, then release (see page 3). ■ Unplug the power cable, wait 5 seconds, reconnect the cable. Press the power button for 2 seconds, then release.
5 Appendix Important safety instructions CAUTION: Do not disassemble this product; there are no user-serviceable parts inside. Refer servicing to qualified service personnel. Do not expose this product to liquid, moisture, or extreme temperatures. The use of controls, adjustments, or procedures other than those specified herein may result in exposure to shock and/or electrical or mechanical hazards. If the OLED breaks, do not touch the glass or liquid. Contact Kodak customer support.
Appendix Care and maintenance Important: Always disconnect the power before cleaning. Do not use water on the frame or any of its parts. ■ To clean the frame or OLED screen, use a soft lint-free cloth dampened with lens cleaning solution or a water-based cleaning solution. Use light pressure. ■ Do not allow chemicals, such as suntan lotion, to contact painted surfaces. ■ Service agreements are available in some countries. Contact a dealer of Kodak products for details.
Appendix Limitations This warranty does not cover circumstances beyond Kodak’s control.
Appendix FCC compliance and advisory KODAK OLED Wireless Frame, model OL7620 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Appendix Hereby, Eastman Kodak Company declares that this Kodak product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. This digital picture frame (OL7620) transmits in 10 dBm. In France, the power level is limited to 10dBm in outdoor environments, per regulations. When in France, use the wireless functions of this device indoors only. Canadian DOC statement DOC Class B Compliance—This Class B digital apparatus complies with Canadian ICES-003.
Appendix Licensing Supply of this product does not convey a license nor imply any right to distribute content created with this product in revenue-generating broadcast systems (terrestrial, satellite, cable and/or other distribution channels), streaming applications (via Internet, intranets and/or other networks), other content distribution systems (pay-audio or audio-on-demand applications and the like) or on physical media (compact discs, digital versatile discs, semiconductor chips, hard drives, memory c
