Scanner User's Guide

A-61560 June 2006 91
Cleaning the rollers and
transport
1. With a roller cleaning pad, wipe the feed rollers from side to side.
Rotate the feed rollers to clean the entire surface.
IMPORTANT: The roller cleaning pad contains sodium lauryl ether
sulfate which can cause eye irritation. Refer to the MSDS
for more information.
2. Dry the rollers with a lint-free cloth.
Cleaning or replacing the
separation module
The separation module should be removed from the scanner for best
cleaning results.
NOTE: When removing or cleaning the separation module, it may be
easier to access the separation module if you remove the input
tray. To remove the input tray, gently push the input tray to the
left or right to release the pin from the slot, and lift it out of
position.
1. Push the separation module release lever down and lift the
separation module up and out of position.