Scanner User's Guide

70 A-61560 June 2006
The Diagnostics
window
The Diagnostics button is located on the Device Settings window.
When you select Diagnostics, you will have access to the General,
Debug and Logs tabs.
When finished viewing or making a change on one of these tabs, you
can click the Done button and return to the Device Settings window.
General diagnostics tab The General tab allows you to perform a scanner test and provides the
scanner time. While similar to the test that the scanner goes through
during power-on, this test is more extensive. If you have an optional A4
flatbed accessory attached, the Device drop-down box in the upper left
corner of the window will be enabled. You can choose either the
Document Feeder or Flatbed test.
Tests
• Scanner — similar to, but more extensive than, a power-on self test,
clicking this button will put the device through a series of checks to
determine that all the scanner hardware is working.
• Count only — check this box if you want to count the number of
documents entering the scanner transport without actually sending
the images to a scanning application.
Scanner Time
• Actual (GMT): displays the Greenwich Mean Time.
• Corresponding local time: displays the local time.
• Refresh icon : redisplays the current scanner time.