Scanner User's Guide

A-61560 June 2006 51
Outline — enter the Origin and Size values. You can enter the desired
values in the fields or use the arrow keys to define the desired area.
The Preview window will show image dimensions and placement as
you change the values. This option is only available when you select a
Document option which allows an Image selection of Part of
Document.
• Origin (x, y): the distance from the left end of the scanner to the left
edge of the scanning area (x) and the distance from the top of the
Detect and Straightened document to the top of the image (y).
• Size (w, h): the width and height of the scanning area.
• Angle: automatically calculates the Origin values based on the
document size selected. This is the angle of the outline.
• Predefined sizes: select a different paper size by using the drop-
down list.
Use the bounding box on the Preview window to adjust or move the
image dimensions and placement.
Border
• Remove: eliminates any residual black border on the image edges.
In order to achieve this, there is a possibility that a small amount of
image data may be lost.
• Add: allows you to add a fixed amount of border to the left, right, top
and bottom edge of the image.
Post-scan rotation options:
• 90, 180, 270 degrees — sometimes “portrait” documents are fed into
the scanner in “landscape” orientation. When this happens, the
image must be rotated to view the original portrait orientation. This
may be accomplished in the scanner by selecting 90°, 180° or 270°.
• Automatic based on content — when selected, images will be
rotated to their proper orientation, if needed.
• None — no rotation will be done.