Scanner User's Guide
Table Of Contents
- 1 Introduction
- 2 Getting Started
- What’s in the box
- System requirements
- Installing the scanner
- Installing the Kodak Driver Software
- Connecting the power cord to the scanner
- Connecting the USB cable
- Attaching the output tray
- Turning on the scanner and finalizing Kodak Driver Software installation
- Installing application software
- Scanner components
- Locking the scanner
- 3 Using the Scanner
- Turning the scanner on and off
- Scanner positions
- Tilting the scanner body
- Adjusting the output tray
- Adjusting the input tray
- Adjusting the side guides
- Start and stop scanning
- Document preparation
- Verifying your scanner installation
- Viewing test images
- Understanding your scanning environment
- Smart touch functionality
- Scanning your documents
- 4 Image Processing
- Overview
- Starting the Scan Validation Tool
- Scan Validation Tool dialog box
- Using the TWAIN datasource
- The main Kodak Scanner window
- The Image Settingswindow
- Preview window
- Toolbar icons
- General tab
- Size tab
- Adjustments tab: black and white
- Adjustments tab: color or grayscale
- Enhancements tab
- Advanced options
- Content Settings tab
- Setting up automatic color detection - Example 1
- Setting up multiple images for each side of a document (dual stream) - Example 2
- Using different settings for each side of a document - Example 3
- Images for each side of a document (dual stream) - Example 4
- The Device Settings window
- The Diagnostics window
- Using the ISIS Driver
- 5 Maintenance
- Cleaning the scanner
- Opening the scanner cover
- Cleaning the rollers and transport
- Cleaning or replacing the separation module
- Replacing the separation module tires
- Cleaning or replacing the feed module
- Replacing the tires on the feed module
- Vacuuming the scanner
- Cleaning the imaging area
- Supplies and consumables
- Accessories
- 6 Troubleshooting
- Appendix A Specifications
- Appendix B Feature Map
- Appendix C Warranty - US and Canada only
18 A-61560 June 2006
3 Using the Scanner
Turning the scanner
on and off
• Press the button on the back of the scanner to turn the scanner on (I)
or off (O).
After you turn on the scanner, wait for it to complete the self-test. When
the scanner is connected to the host PC and the self-test completes,
the green indicator light will remain on and constant and the function
window will display “1”.
If the scanner is not connected to the host PC and the self-test
completes, the red indicator will be on and the function window will be
blank.
Scanner positions The Kodak i1200 and i1300 Series Scanners are equipped with a tilt
feature which allows the scanner to be used in two positions.
Depending upon your scanning needs, you can tilt the scanner body
and position the input and output trays. The tilt feature also allows
scanning in tight spaces when space is limited and stores easily when
not in use. The following illustrations show the angles the scanner can
be placed in. Simply press the tilt release button and tilt the scanner
body into a 25- or 65-degree angle.
25-degree angle