Scanner User's Guide
Table Of Contents
- 1 Introduction
- 2 Getting Started
- What’s in the box
- System requirements
- Installing the scanner
- Installing the Kodak Driver Software
- Connecting the power cord to the scanner
- Connecting the USB cable
- Attaching the output tray
- Turning on the scanner and finalizing Kodak Driver Software installation
- Installing application software
- Scanner components
- Locking the scanner
- 3 Using the Scanner
- Turning the scanner on and off
- Scanner positions
- Tilting the scanner body
- Adjusting the output tray
- Adjusting the input tray
- Adjusting the side guides
- Start and stop scanning
- Document preparation
- Verifying your scanner installation
- Viewing test images
- Understanding your scanning environment
- Smart touch functionality
- Scanning your documents
- 4 Image Processing
- Overview
- Starting the Scan Validation Tool
- Scan Validation Tool dialog box
- Using the TWAIN datasource
- The main Kodak Scanner window
- The Image Settingswindow
- Preview window
- Toolbar icons
- General tab
- Size tab
- Adjustments tab: black and white
- Adjustments tab: color or grayscale
- Enhancements tab
- Advanced options
- Content Settings tab
- Setting up automatic color detection - Example 1
- Setting up multiple images for each side of a document (dual stream) - Example 2
- Using different settings for each side of a document - Example 3
- Images for each side of a document (dual stream) - Example 4
- The Device Settings window
- The Diagnostics window
- Using the ISIS Driver
- 5 Maintenance
- Cleaning the scanner
- Opening the scanner cover
- Cleaning the rollers and transport
- Cleaning or replacing the separation module
- Replacing the separation module tires
- Cleaning or replacing the feed module
- Replacing the tires on the feed module
- Vacuuming the scanner
- Cleaning the imaging area
- Supplies and consumables
- Accessories
- 6 Troubleshooting
- Appendix A Specifications
- Appendix B Feature Map
- Appendix C Warranty - US and Canada only
A-61560 June 2006 111
Installation Warning
and Disclaimer
KODAK WILL NOT BE RESPONSIBLE FOR ANY CONSEQUENTIAL
OR INCIDENTAL DAMAGES RESULTING FROM THE SALE,
INSTALLATION, USE, SERVICING OR IMPROPER FUNCTIONING
OF THIS PRODUCT, REGARDLESS OF THE CAUSE. SUCH
DAMAGES FOR WHICH KODAK WILL NOT BE RESPONSIBLE,
INCLUDE, BUT ARE NOT LIMITED TO, LOSS OF REVENUE OR
PROFIT, LOSS OF DATA, DOWNTIME COSTS, LOSS OF USE OF
THE PRODUCT, COST OF ANY SUBSTITUTE PRODUCT,
FACILITIES OR SERVICES OR CLAIMS OF CUSTOMERS FOR
SUCH DAMAGES.
If there is any conflict between other sections of this appendix and the
Limited Warranty, the terms of the Limited Warranty prevail.
How to obtain limited
warranty service
Kodak Scanners are supplied with information on unpacking, setup,
installation and operation. Careful reading of the User’s Guide will
answer most of the technical questions the end user might have
regarding proper installation, operation and maintenance of the
product. However, should additional technical support be required, you
may visit our website at: www.Kodak.com/go/warranty or contact:
Kodak’s Response Center
(800) 822-1414
The Response Center is available Monday – Friday (excluding Kodak
holidays) 8 a.m. to 5 p.m. EST.
Before placing the call, the eligible purchaser should have the Kodak
Scanner model number, part number, serial number and proof of
purchase available. The eligible purchaser should also be prepared to
provide a description of the problem.
Response Center personnel will assist the end user in resolving the
problem over the phone. The end user may be asked to run some
simple, self-diagnostic tests and report the resulting status and error
code messages. This will assist the Response Center in determining if
the problem is the Kodak Scanner or another component and if the
problem can be resolved over the phone. If the Response Center
determines a hardware problem exists that is covered either under the
Limited Warranty or a purchased Maintenance Agreement, a Return
Material Authorization Number (RMA) will be assigned as needed, a
service request will be initiated and repair or replacement procedures
will follow.