Scanner User's Guide
Table Of Contents
- 1 Introduction
- 2 Getting Started
- What’s in the box
- System requirements
- Installing the scanner
- Installing the Kodak Driver Software
- Connecting the power cord to the scanner
- Connecting the USB cable
- Attaching the output tray
- Turning on the scanner and finalizing Kodak Driver Software installation
- Installing application software
- Scanner components
- Locking the scanner
- 3 Using the Scanner
- Turning the scanner on and off
- Scanner positions
- Tilting the scanner body
- Adjusting the output tray
- Adjusting the input tray
- Adjusting the side guides
- Start and stop scanning
- Document preparation
- Verifying your scanner installation
- Viewing test images
- Understanding your scanning environment
- Smart touch functionality
- Scanning your documents
- 4 Image Processing
- Overview
- Starting the Scan Validation Tool
- Scan Validation Tool dialog box
- Using the TWAIN datasource
- The main Kodak Scanner window
- The Image Settingswindow
- Preview window
- Toolbar icons
- General tab
- Size tab
- Adjustments tab: black and white
- Adjustments tab: color or grayscale
- Enhancements tab
- Advanced options
- Content Settings tab
- Setting up automatic color detection - Example 1
- Setting up multiple images for each side of a document (dual stream) - Example 2
- Using different settings for each side of a document - Example 3
- Images for each side of a document (dual stream) - Example 4
- The Device Settings window
- The Diagnostics window
- Using the ISIS Driver
- 5 Maintenance
- Cleaning the scanner
- Opening the scanner cover
- Cleaning the rollers and transport
- Cleaning or replacing the separation module
- Replacing the separation module tires
- Cleaning or replacing the feed module
- Replacing the tires on the feed module
- Vacuuming the scanner
- Cleaning the imaging area
- Supplies and consumables
- Accessories
- 6 Troubleshooting
- Appendix A Specifications
- Appendix B Feature Map
- Appendix C Warranty - US and Canada only
104 A-61560 June 2006
Error code listing Following is a list of messages and corrective actions you can take if
one of the following messages is encountered.
Problem Possible Solution
Images have black background bleed-
through
When scanning translucent documents, black bleed-through may be
displayed on the image. To minimize this, adjust the Contrast value or
select Draft (Fixed) TWAIN or Fixed Processing in ISIS to improve the
image or use the Kodak White Background Strip Accessory.
Error Message Description
2 Scanner failed initialization
3 Multi-feed detected A multi-feed was detected due to a length checking condition or
multi-feed condition. Depending on how your scanner is set up,
you may need to restart the scanner. Check your PC monitor to
verify your images to be sure no documents were overlapped and
need to be rescanned.
4 Multi-feed detected, transport
stopped
A multi-feed was detected due to a length checking condition or
multi-feed condition. Depending on how your scanner is set up,
you may need to restart the scanner. Check your PC monitor to
verify your images to be sure no documents were overlapped and
need to be rescanned.
5 Jam in transport A document is lodged in the scanner. Clear the paper path by
opening the scanner cover, removing the lodged document,
closing the scanner cover.
6 Calibration succeeded Informational message. The scanner has been successfully
calibrated.
7 Calibration failed Informational message. A calibration was performed and failed.
28 Ultrasonics calibration succeeded Informational message. The scanner has been successfully
calibrated.
29 Ultrasonics calibration failed Informational message. A calibration was performed and failed.
33 Call Service. The scanner detected an error that cannot be resolved. Contact
Service.
44 Refeed document set
• The documents are too close together as they enter the scanner.
Replace the separation roller tires.
• One or more documents that passed through the transport were
not scanned. Refeed all documents for which images were not
obtained.
57 Reset scanner An error occurred that the scanner cannot resolve without
recycling the power to the scanner. Turn the scanner off, then
back on again. If the error persists, call Service.