Scanner User's Guide
Table Of Contents
- 1 Introduction
- 2 Getting Started
- What’s in the box
- System requirements
- Installing the scanner
- Installing the Kodak Driver Software
- Connecting the power cord to the scanner
- Connecting the USB cable
- Attaching the output tray
- Turning on the scanner and finalizing Kodak Driver Software installation
- Installing application software
- Scanner components
- Locking the scanner
- 3 Using the Scanner
- Turning the scanner on and off
- Scanner positions
- Tilting the scanner body
- Adjusting the output tray
- Adjusting the input tray
- Adjusting the side guides
- Start and stop scanning
- Document preparation
- Verifying your scanner installation
- Viewing test images
- Understanding your scanning environment
- Smart touch functionality
- Scanning your documents
- 4 Image Processing
- Overview
- Starting the Scan Validation Tool
- Scan Validation Tool dialog box
- Using the TWAIN datasource
- The main Kodak Scanner window
- The Image Settingswindow
- Preview window
- Toolbar icons
- General tab
- Size tab
- Adjustments tab: black and white
- Adjustments tab: color or grayscale
- Enhancements tab
- Advanced options
- Content Settings tab
- Setting up automatic color detection - Example 1
- Setting up multiple images for each side of a document (dual stream) - Example 2
- Using different settings for each side of a document - Example 3
- Images for each side of a document (dual stream) - Example 4
- The Device Settings window
- The Diagnostics window
- Using the ISIS Driver
- 5 Maintenance
- Cleaning the scanner
- Opening the scanner cover
- Cleaning the rollers and transport
- Cleaning or replacing the separation module
- Replacing the separation module tires
- Cleaning or replacing the feed module
- Replacing the tires on the feed module
- Vacuuming the scanner
- Cleaning the imaging area
- Supplies and consumables
- Accessories
- 6 Troubleshooting
- Appendix A Specifications
- Appendix B Feature Map
- Appendix C Warranty - US and Canada only
A-61560 June 2006 101
6 Troubleshooting
Occasionally you may encounter a situation with your scanner where it
may not function properly. Refer to the information in this chapter to
help you resolve the situation before calling Technical Support.
Indicator lights and
error codes
The indicator light provides information on the current state of the
scanner.
Steady green: scanner is ready to scan.
Steady red: indicates a scanner error, such as the scanner cover is
open or a document jam.
Flashing green: waiting/Energy Star mode; scanning/busy.
Flashing red: scanner failure.
Following is a listing of the error codes that may be displayed in the
function window. When an error is indicated, the indicator light will blink
the same number of times as the number displayed in the function
window. Therefore, if the scanner cover is open, the number “6” will be
displayed in the function window and the indicator will flash red and
blink six times.
0 USB cable is not connected.
1 - 5, 7 and 8 Call Service.
6 The scanner cover is open.
9 There is a document jam.
NOTE: The numbers 1-9 may be displayed when the scanner’s LED is
green. These are not error codes; they are function numbers.
Used together with the Start button and smart touch
functionality, the function buttons can greatly improve your ease
of use.