User Manual

29
Panorama Mode
Panorama Mode allows you to create a panoramic
picture. The camera will automatically compose a
panoramic picture using the individual shots that
you take.
Follow these easy steps to create a panoramic
picture:
1. Press the
button to select Panorama Mode
(
).
2. Press the arrow buttons to select a desired
shooting direction. Should you not select a
direction, the default shooting direction is
“right.” 2 seconds later, the camera will be ready
to take pictures. You can also press the
button or press the shutter button halfway down
to get ready to take panaramic pictures.
3. Compose the irst view of the panoramic picture
on the LCD and press the Shutter button to
capture the image.
4. After the irst shot is taken, the semi-
transparent image of the irst shot will appear at
the edge of the screen. You can use this image
to compose and align your next picture before
you press the shutter button to capture and
inish manual stitching.
5. If continuous pictures are less than 4
shots, press the button, the camera will
automatically stitch the pictures together. Press
the Playback button to enter Playback Mode to
see the inished eect.
6. If you take 4 pictures, the camera will stitch
the pictures together automatically. Press the
Playback button to enter Playback Mode to see
the inished eect.
In Panorama Mode, the Flash, Self-Timer,
Macro Modes and Exposure Compensation
are not available. Focus Adjustment is also
not available at this time.
In Panorama Mode, up to 4 photos can be
captured when the image size is set at 2M.