Operation Manual
Table Of Contents
- Kodak EasyShare M1063/MD1063 digital camera
- Product features
- Table of contents
- Setting up your camera
- Taking pictures/videos
- Working with pictures/videos
- Reviewing pictures/videos
- Using sound tags
- Deleting pictures/videos
- Using the menu button in Review
- Using Kodak Perfect Touch technology
- Cropping pictures
- Editing videos
- Running a slide show
- Viewing pictures/videos in different ways
- Selecting multiple pictures/videos
- Copying pictures/videos
- Understanding the review icons
- Doing more with your camera
- Transferring, printing, tagging
- Installing the software
- Transferring pictures with the USB cable
- Printing pictures
- Dock compatibility for your camera
- Tagging your pictures
- Troubleshooting
- Getting help
- Appendix
- Index

Taking pictures/videos
www.kodak.com/go/support
7
Using optical zoom
Use optical zoom to get up to 3X closer to your subject.
1 Use the LCD to frame your subject.
2 Press Telephoto (T) to zoom in. Press Wide Angle
(W) to zoom out.
The zoom indicator shows zoom status.
3 Take the picture or video.
NOTE: For focus distances, see page 54.
■ Always use the auto focus framing marks,
page 6.
■ If you are not using zoom (1X, wide angle), you
can be as close as 23.6 in. (60 cm) to your
subject. In Close-up (wide angle), you can be as
close as 0.10 m (3.9 in.)
■ As you zoom, you need to move further from
your subject.
Using the digital zoom
Use digital zoom in any Still mode or during video recording to get up to 5X
magnification beyond optical zoom for a combined zoom of 15X.
1 Press Telephoto (T) to the maximum optical zoom limit. Release the button, then
press it again.
2 Take the picture.
NOTE: You may notice decreased image quality when using digital zoom. The slider on the zoom indicator
turns red when the picture quality reaches the limit for an acceptable 4 x 6-in. (10 x 15 cm) print.
Optical
zoom
range
Digital
zoom
range
WTD










