KODAK DC5000 Zoom Digital Camera User’s Guide Visit Kodak on the World Wide Web at www.kodak.
Eastman Kodak Company 343 State Street Rochester, N.Y. 14650 ©Eastman Kodak Company, 2000. Kodak, and Photolife, are trademarks of Eastman Kodak Company.
About the Camera’s Weatherproof & Rugged Design This camera is designed to be weatherproof and rugged. Special seals keep out moisture for a sure, carefree performance in any weather. While you cannot use the camera underwater, ideally it can safely be used: q in the rain q at pool-side or the beach q at a construction site or areas with excessive dirt or dust. Important Camera Information This camera is designed to be weatherproof, not waterproof.
q Always insert and remove the batteries and memory cards with dry, clean hands. q If water gets into the camera, remove the batteries and lens glass cover and allow the camera to dry completely. Do not apply power to the camera until it is completely dry. q Before using the camera, make sure the lens cover is secured and that all sensors and lenses are clean and dry. q Although the camera can be used at the beach, use extreme caution not to get sand on the camera seals.
Table of Contents 1 Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Preparing to Take Pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Loading Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Turning the Camera On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Checking Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 Customizing Your Pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Adjusting the Camera Exposure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Adding a Border to Your Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Capturing in Black-and-White, Sepia Tone, or Document . . . . . . . . . . . 24 Adjusting the Picture Quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Adjusting the Picture Resolution . . . . . . . .
Setting an Exposure Compensation Default . . . . . . . . . . . . . . . . . . 53 Setting an Effect Default . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54 Setting an Auto ISO Default . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55 6 Installing Your Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Windows-Based System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Macintosh System Requirements . . . . . . . . . . . . . .
Getting Better Results from Your Printer . . . . . . . . . . . . . . . . . . . . . . . 70 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 9 Where to Get Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 Software Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 Online Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1 Getting Started 1 Congratulations on your purchase of the new water resistant, dust proof, 2.0 megapixel KODAK DC5000 Zoom Digital Camera—the camera that takes pictures digitally, without the use of film. With your new camera, picture taking and print making have never been easier or faster. The possibilties are endless. Here is just a few examples of what you can do with your camera: q Utilize the rugged weatherproof design to take pictures in environments not recommended for other cameras.
Preparing to Take Pictures Before you start taking pictures with your camera, you first need to install the batteries or connect a Kodak-specified AC adapter for power, and insert a KODAK Picture Card (camera memory card) into the camera. Loading Batteries Your camera uses four AA batteries. For your convenience, alkaline batteries are provided so you can start using your camera immediately. For information on guidelines for battery usage, see page 91. 1 Lift the ring on the battery door.
Checking Batteries So that you are never caught with dead batteries, your camera indicates the power level of the batteries, in the form of a battery status symbol, on the Status Display when you turn on the camera. For information on guidelines for battery usage, see page 91. Capture Review Setup 1 Set the Mode dial to Capture, Review, or Camera Settings. The battery status symbol is not visible if you set the camera to Connect. 2 Slide the POWER switch to the right to turn on the camera.
Inserting a Camera Memory Card Your camera comes with a KODAK Picture Card (camera memory card), which is used to store pictures you take with the camera. The camera memory card, also referred to as a CompactFlash card, is removable and reusable for easy storage and transfer of your pictures. You can purchase additional KODAK Picture Cards from dealers of KODAK products, or from our Web site at http:// www.kodak.com/go/accessories.
Setting the Clock on Your Camera Your camera has a built-in clock that maintains the date and time in a 24-hour format. The camera clock needs to be set if you plan to use the Date Stamp feature, which imprints the date on your picture. For information on using the Date Stamp feature, see page 19. If you remove the batteries from the camera for an extended period of time, or the batteries become exhausted, you may need to reset the clock. 1 Set the Mode dial to Camera Setup.
Adjusting the LCD Brightness You can adjust the brightness of the color LCD to suit your particular needs. 1 Set the Mode dial to Camera Setup. You can set the Mode dial to any setting you want as long as there is an image in the LCD screen to adjust the brightness level. Menu Review Capture Setup 2 Slide the POWER switch to the right to turn on the camera. The main Camera Setup screen appears.
2 Taking Pictures 2 Your camera makes taking pictures fun. Just set the camera to Capture and you are on your way to creating great pictures. Everything you need is right at your fingertips. With the camera you can: q Preview the picture before it is taken. q Zoom in closer on your subject. q Automatically lock the focus on the subject when you press the SHUTTER button. q View the picture you just took. q Vary the flash settings to give you control over the type of flash needed for specific conditions.
Previewing a Picture Before it is Taken If you want to see what a picture looks like before you take it, preview the image on the LCD on the back of your camera. The live image that appears is very helpful for framing your subject, especially when using the Close-Up, Digital Zoom, and Border features. If you want to take pictures in black and white or sepia tone, or highlight text, Preview can help you make that decision.
Pressing the Shutter Button Taking pictures is a snap with your camera. The SHUTTER button on your camera locks in the auto focus and takes the picture. 1 Set the Mode dial to Capture. Menu Review Setup Capture 2 Slide the POWER switch to the right to turn on the camera. 3 Center the subject using the guide marks in the viewfinder, or turn on Preview (page 10) and use the LCD to frame your subject. 4 Press the SHUTTER button half-way down to lock in the camera auto focus.
Zooming in on Your Subject With a touch of a button you can zoom from Wide Angle, which gives you more of the surrounding area in pictures, to TelePhoto, which brings the subject in closer. 1 Set the Mode dial to Capture. 2 Slide the POWER switch to the right to turn on the camera. 3 Press the ZOOM control. When you look through the viewfinder, the subject appears closer or farther away as you press the ZOOM button.
Viewing the Picture Just Taken You can view a picture seconds after it is taken with a touch of a button. It is a handy way to check if your subject was positioned correctly. 1 Set the Mode dial to Capture. Menu Review Setup Capture 2 Slide the POWER switch to the right to turn on the camera. 3 Press the SHUTTER button to take a picture. 4 Press the button. The picture just taken appears in the LCD for several seconds with the delete icon above the button.
Setting a Quickview for Each Picture You can set the camera so a quick view of the picture just taken appears in the LCD automatically using the Quickview feature. 1 Set the Mode dial to Capture. Menu Review Setup Capture 2 Slide the POWER switch to the right to turn on the camera. 3 Press the MENU button. The main Menu screen appears. 4 Press a / button until is highlighted. 5 Press the DO-IT button. The LCD displays the Quickview screen. The current setting is checked (ä).
Setting the Flash When taking pictures at night, indoors, or outdoors in heavy shadows, your pictures need flash. For everyday picture-taking, use the Auto setting. However, there are times when changing the flash option can improve your pictures. For instance, if you are taking pictures of people indoors or at night, you can help reduce the likelihood of red eye by using the Red-Eye setting. When your subject is outdoors under heavy shadows, you can eliminate those shadows by using the Fill flash.
Photographing Distant Subjects If you want to create postcard-like pictures of scenic views, such as a sunset or mountain range, use the Infinity Focus feature. When Infinity Focus is selected, the camera automatically turns off the flash and auto focus so you get sharp, clear pictures. 1 Set the Mode dial to Capture. Menu Review Setup Capture 2 Slide the POWER switch to the right to turn on the camera. 3 Press the INFINITY FOCUS/CLOSE-UP button once.
Photographing Close-Ups If you want to take pictures of objects up close, such as flowers or artwork, use the Close-Up feature. When selected, the camera automatically sets the focus distance to 0.8 to 1.6 ft (0.25 to 0.5 m) and sets the flash to ensure detail and clarity. Since the viewfinder on the camera may not accurately frame your picture in Close-Up, the Preview option is automatically activated. For information on Preview, see page 10.
Putting Yourself in the Picture There might be times when you want everyone, including yourself, to be in the picture. For these occasions, use the Self-Timer feature to create a 10-second delay between the time you press the SHUTTER button and the time the picture is taken. 1 Set the Mode dial to Capture. Menu Review Setup Capture 2 Slide the POWER switch to the right to turn on the camera. 3 Press the SELF-TIMER button. The Self-timer icon appears in the Status Display.
Adding the Date to Your Pictures You may want to keep track of when a picture was taken, perhaps to record a child’s first picture or for an insurance claim. Whatever the reason, your camera has the ability to record the date and time directly on your picture using the Date Stamp feature. In order for the feature to imprint the correct date and time, you need to set the camera clock. See page 6 for details. Once a picture is taken with the date stamp, the date stamp cannot be removed.
Deleting the Picture Just Taken If you decide that you do not like a picture, you can delete it quickly from the camera memory card immediately after it is taken if Quickview is turned on. Once you delete the picture, it is permanently removed from the camera memory card. 1 Set the Mode dial to Capture. Menu Review Setup Capture 2 Slide the POWER switch to the right to turn on the camera. 3 Turn on Quickview (page 14). 4 Frame your subject in the viewfinder and press the SHUTTER button.
3 Customizing Your Pictures Chapters 1 and 2 explained the basics for taking great digital pictures. In this chapter, you will learn about some of the custom features available on your camera. Because your camera is so versatile, you have the ability to set the camera for almost any picture taking situation you may encounter. With the camera, you can: 3 q Adjust the exposure for pictures that are too light or too dark.
Adjusting the Camera Exposure If your pictures seem too dark or too light, adjust the amount of light allowed into the camera so that your pictures are properly exposed. These adjustments in lighting are called Exposure Compensation. 1 Set the Mode dial to Capture. Menu Review Setup Capture 2 Slide the POWER switch to the right to turn on the camera. 3 Press the Menu button. The LCD displays the main Menu screen. 4 Press a / button until the icon is highlighted. 5 Press the DO-IT button.
Adding a Border to Your Picture You can add a border or logo (or both) to your picture. When you use the Border feature, the camera Preview turns on automatically to help you frame the picture and see if the border selected works well with your subject. If you like the border, go ahead and take the picture. If you do not like the border, select a different one. Although borders are not included on the camera memory card, you can create and add your own borders or logos.
Capturing in Black-and-White, Sepia Tone, or Document With the Effect setting, you can take black-and-white pictures, use sepia tone to give your picture an antique look, or take pictures of documents so text stands out. When using the Effects feature, the camera Preview automatically turns on so that you can see if the effect selected works well with your subject. If you like the effect, go ahead and take the picture. If you do not like the effect, select a different one before taking the picture.
Adjusting the Picture Quality If you intend to make large prints, you can capture more detail in the picture using the Best setting. However, with this setting more storage room is used on the camera memory card. For everyday pictures, use the Better setting, which gives you great pictures and more storage space on the camera memory card. If you need to store a large number of pictures on the camera memory card or are going to e-mail or use the pictures online, use the Good setting.
Adjusting the Picture Resolution If you want to send pictures through e-mail or use them online, use the Standard resolution setting. With this setting, only the information needed for viewing on a computer or printing small prints is captured. For pictures that are going to be printed, use the High resolution setting. With this setting, more information is captured, but fewer pictures fit on the camera memory card. 1 Set the Mode dial to Capture.
Selecting a White Balance for Indoor Pictures If you use your camera indoors where flash is prohibited, your pictures may take on a green tint if captured under fluorescent tube lighting, or a reddish-orange tint if captured under tungsten household lighting. You can correct this problem using the White Balance feature on the camera. Use the Auto setting for everyday pictures. Use the Daylight, Fluorescent, or Tungsten setting for taking pictures under these lighting conditions without flash.
Choosing a Metering System You can control the way light affects your pictures using the metering systems available on your camera. If you want a nice even exposure throughout the picture, use the Multi-Pattern setting. This setting is great for everyday pictures. If you want to emphasize the center of your picture, such as a person’s face, while at the same time de-emphasizing the background, use the Center-Weighted setting. 1 Set the Mode dial to Capture.
Selecting the ISO Setting If you take pictures in low light without flash, such as in a museum, you can select the Auto ISO sensitivity on the camera to help prevent blurred pictures caused by camera movement. With this feature the shutter speed is automatically increased to make the camera more responsive, while maintaining proper exposure for the picture. 1 Set the Mode dial to Capture. Menu Review Setup Capture 2 Slide the POWER switch to the right to turn on the camera. 3 3 Press the Menu button.
Sharpening and Softening a Picture If you plan to edit your pictures using image editing software, the Sharpness feature can make some editing processes easier. By selecting the Sharp setting, the edges around the picture are enhanced, making it easier to cut or crop the image. If you want to blend the image into a background, use the Soft setting to de-emphasize the edges. For everyday picture-taking, keep the Sharpness feature set to Standard.
Locking in an Exposure Setting If you take a series of pictures that require a consistent look or a constant exposure setting, use the Exposure Lock feature. This feature is great for taking a series of pictures, like a mountain range, and creating a mural with the prints. 1 Set the Mode dial to Capture. Menu Review Setup Capture 2 Slide the POWER switch to the right to turn on the camera. 3 Press the Menu button. The LCD displays the main Menu screen.
4 Reviewing Your Pictures Now that you have taken pictures with your camera, it is time to take a look at them by setting the camera to Camera Review. With this mode, you can: q View your pictures and see how any custom features, if any, were applied to the shot. q Magnify the picture to check the detail. 4 q Select specific pictures and quantities to be printed. q Protect pictures from being deleted from your camera memory card. q Delete unwanted pictures to free up space on the camera memory card.
Viewing Your Pictures To view each picture in full LCD size, or you can view up to three smaller thumbnail-size pictures at a one time using the Filmstrip feature. 1 Set the Mode dial to Review. Menu Review Setup Capture 2 Slide the POWER switch to the right to turn on the camera. The LCD displays the last picture taken with the frame number, and the Print Order and Protect icons, if activated. 3 Use the / buttons to scroll through and view the pictures on the LCD.
Magnifying Your Pictures To zoom in on a specific part of a picture displayed on the LCD, use the Magnify feature. This feature lets you view a section of the current picture at two times the normal LCD size. 1 Set the Mode dial to Review. Menu Review Setup Capture 2 Slide the POWER switch to the right to turn on the camera. The last picture taken appears on the LCD screen. 3 Press the Menu button. 4 The main Review Menu screen appears.
Selecting Pictures for Printing You can scroll through and select certain pictures on the camera memory card to print, as well as create an index of all of the pictures using the Print Order feature. This feature is useful because it saves you time when printing pictures from a KODAK Picture Maker, or Personnel Picture Maker Systems. 1 Set the Mode dial to Review. Menu Review Setup Capture 2 Slide the POWER switch to the right to turn on the camera. The last picture taken appears on the LCD screen.
8 Press the DO-IT button. The Copies screen appears, unless you selected the Index Print option, which returns you to the main Review screen. 9 Press a / button until the desired number of prints you want appears. 10 Press the DO-IT button. The print order is accepted and the Print Order icon appears in the LCD of each picture marked for printing. The main Print Order screen reappears. 11 To exit Print Order, highlight EXIT, then 4 press the DO-IT button.
Protecting Your Pictures Safeguard your pictures from being deleted accidentally from the camera memory card by using the Protect feature. This feature is very useful if the camera and camera memory card are used by more than one person. 1 Set the Mode dial to Review. Menu Review Setup Capture 2 Slide the POWER switch to the right to turn on the camera. The last picture taken appears on the LCD screen. 3 Press the Menu button. The main Review Menu screen appears.
Deleting One or All of Your Pictures If you decide that you do not like the pictures stored on the camera memory card, or you just want to free up space, use the Delete feature to remove one or all of the pictures on the card. If you have marked pictures as protected, they cannot be deleted until you turn off the Protect feature. See page 38 for details. 1 Set the Mode dial to Review. Menu Review Setup Capture 2 Slide the POWER switch to the right to turn on the camera.
Running a Slide Show on Your Television View your pictures on the camera LCD, or connect your camera to a television and display your pictures to a large audience using the Slide Show feature. The pictures appear on the television for a period of 1 to 99 seconds, a time you set from the camera. The slide show ends after all the pictures have been shown; or, if you are using a Kodak-specified AC adapter, the slide show continues until you stop it. 1 Set the Mode dial to Review.
Viewing Information About a Picture Look up specific information about a picture using the Picture Information feature. The information that appears is for viewing and cannot be edited. 1 Set the Mode dial to Review. Menu Review Setup Capture 2 Slide the POWER switch to the right to turn on the camera. The last picture taken appears on the LCD screen. 3 Press the Menu button. The main Review Menu screen appears. 4 Press a / button until the icon is highlighted. 5 Press the DO-IT button.
5 Personalizing Your Camera Tailor your camera to fit whatever picture-taking needs you have. When you set the camera to Camera Setup, you have the ability to personalize your camera so it performs the way you want, each time you use it. With the camera, you can: q Set a camera response beep, so you get feedback from the camera when you initiate an action. q Select a power-save setting to help conserve batteries. q Access camera information to view a complete history of your 5 cameras use.
Setting a Response Beep Your camera provides auditory feedback in the form of a beep anytime the SHUTTER button is pressed, or when the camera cannot perform a selected function. If you do not want auditory feedback, turn off the beep. This can be especially useful when taking a spontaneous picture of someone or of wildlife. 1 Set the Mode dial to Camera Setup. Menu Review Setup Capture 2 Slide the POWER switch to the right to turn on the camera. The main Camera Setup screen appears.
Saving Camera Power The Power Save feature helps extend battery life by shortening the time that the camera power stays on when not in use. For your convenience, the Power Save setting is automatically activated. If situations arise where you need the camera power to stay on for a longer period of inactivity, such as connecting the camera to a computer, turn off the Power Save feature to have more time to work before the camera automatically shuts off. 1 Set the Mode dial to Camera Setup.
Viewing Camera Information Have you ever wondered how many pictures you have taken with your camera or how many times the flash fired? The Camera Information feature keeps a record for you. 1 Set the Mode dial to Camera Setup. Menu Review Setup Capture 2 Slide the POWER switch to the right to turn on the camera. The main Camera Setup screen appears. 3 Press a / button until the icon is highlighted. 4 Press the DO-IT button. The About screen appears.
Selecting a Language for the Camera Select from many different languages for the camera. Once you select a language, the text changes to reflect the language selected. 1 Set the Mode dial to Camera Setup. Menu Review Setup Capture 2 Slide the POWER switch to the right to turn on the camera. The main Camera Setup screen appears. 3 Press a / button until the icon is highlighted. 4 Press the DO-IT button. The Language screen appears. The current setting is checked (ä).
Formatting Your Camera Memory Card If you own camera memory cards (CompactFlash cards) that have been used in other digital cameras, they may not be properly formatted for use in your camera, or the data on the card may become corrupted. When these issues arise, your camera indicates that the camera memory card needs to be formatted. When you format a camera memory card, all of the information on the card is erased. This includes pictures, borders and all other files.
Adjusting the Video Out Signal Set your camera so that it is compatible with NTSC or PAL video signals. The Video Out feature needs to be set correctly if you plan on running a slide show of the pictures from the camera on a television or video monitor. For information on setting up a slide show, see page 40. 1 Set the Mode dial to Camera Setup. Menu Review Setup Capture 2 Slide the POWER switch to the right to turn on the camera. The main Camera Setup screen appears.
Adjusting the Camera Default Settings Customize your camera so specific settings are activated automatically each time you turn on the camera. Select settings for Flash, White Balance, Exposure Compensation, Borders, and Effects to suit your particular picture-taking needs. For default settings, see page 87. Setting a Border Default Adjust the camera so your favorite frame or graphic is added to each picture you take. This is handy for incorporating your company logo into the pictures.
Setting a Flash Default Adjust your camera so that it is set to a specific flash setting every time you turn on the camera. For more information about the Flash setting, see page 15. 1 Set the Mode dial to Camera Setup. Menu Review Setup Capture 2 Slide the POWER switch to the right to turn on the camera. The main Camera Setup screen appears. 3 Press a / button until the icon is highlighted. 4 Press the DO-IT button. The Flash Default screen appears. The current setting is checked (ä).
under. For more information about the White Balance feature, see page 27. 1 Set the Mode dial to Camera Setup. Menu Review Setup Capture 2 Slide the POWER switch to the right to turn on the camera. The main Camera Setup screen appears. 3 Press a / button until the icon is highlighted. 4 Press the DO-IT button. The White Balance Default screen appears. The current setting is checked (ä). 5 Press a / button until the White Balance option you want is highlighted.
Setting an Exposure Compensation Default Adjust the Exposure Compensation setting so that it is used every time you turn on the camera. For more information about The Exposure Compensation feature, see page 22. 1 Set the Mode dial to Camera Setup. Menu Review Setup Capture 2 Slide the POWER switch to the right to turn on the camera. The main Camera Setup screen appears. 3 Press a / button until the icon is highlighted. 4 Press the DO-IT button.
Setting an Effect Default If you work for a newspaper or in an office environment where you need to record lecture slides, you can adjust your camera so it takes pictures in black and white, sepia tone, or to highlight text every time you turn on the camera. For more information about the Effects feature, see page 24. 1 Set the Mode dial to Camera Setup. Menu Review Setup Capture 2 Slide the POWER switch to the right to turn on the camera. The main Camera Setup screen appears.
Setting an Auto ISO Default If you always use your camera indoors without flash, you can set the camera so it uses a faster shutter speed to help avoid blurry pictures from camera movement. For more information about the Auto ISO feature, see page 29. 1 Set the Mode dial to Camera Setup. Menu Review Setup Capture 2 Slide the POWER switch to the right to turn on the camera. The main Camera Setup screen appears. 3 Press a / button until the icon is highlighted. 4 Press the DO-IT button.
6 Installing Your Software The KODAK DC5000 Camera Software (Installer) included with your camera contains software for Windows-based personal computers and Macintosh computers. These applications provide a variety of features that let you access and use the pictures stored on the camera memory card. Detailed information on using the software can be found in the online help supplied with each software application. Windows-Based System Requirements q Windows 95, Windows 98, Windows NT 4.
KODAK Software for Windows-Based Computers There are four KODAK software applications supplied with the camera for use on a Windows-based computer. They are: q KODAK DC5000 Camera Mounter Software (Mounter)—provides an easy way to view pictures from the camera memory card and copy them to your computer.
KODAK Software for Macintosh Computers There are three KODAK software applications supplied with the camera for use on a Macintosh computer. They are: q KODAK DC5000 Picture Transfer Application (Picture Transfer)— provides an easy way to view pictures from the camera memory card and copy them to your computer.
Installing the Software While the Installer is automatically loading your software, take a few minutes to fill out and send in the camera product registration card. This allows you to receive information regarding software updates and registers some of the products included with the camera. 1 Close all other software programs before starting the Installer. 2 Place the Installer CD into the CD-ROM drive. 3 Load the software.
7 Connecting Your Camera In order for you to transfer pictures taken with your camera, you first need to connect the camera to your computer or use a card reader. The camera can communicate with your computer using one of the following: q RS-232 serial cable connection for Windows-based computers. q Serial cable or adapter plug for Macintosh computers. q Universal Serial Bus (USB) cable connection for both Windows 98 and 2000-based personal computers and Macintosh computers. q Card reader.
Using a Serial Cable Connection The traditional means of connecting the camera to your computer is by serial cable. When connecting the camera, it is a good idea to use a KODAK-specified AC adapter (see page 4) to conserve battery power. Connecting to a Windows-Based Computer An RS-232 serial cable is provided so you can connect your camera to a Windows-based computer. 1 Set the Mode dial to Connect.
Connecting to a Macintosh Computer Either a serial cable for a Macintosh computer or adapter plug for use with the RS-232 serial cable is provided so that you can connect your camera through a serial port on a Macintosh computer. 1 Set the Mode dial to Connect. Menu Review Setup Capture 2 Connect the serial port adapter plug into the 9pin end of the serial cable. 3 Plug the adapter end of the serial cable into an available serial port on the back of the computer.
Using a USB Cable Connection If you have a personal computer with a Universal Serial Bus (USB) port, and are running Windows 98, Windows 2000, or a Macintosh 8.5.1 or higher computer, you may be able to connect the camera using a USB connection. The USB interface provides an easy and faster alternative to a serial cable connection. KODAK only recommends and supports using the camera with the systems listed in the System Requirements on page 57.
Starting KODAK Software for Windows-Based Computers With the camera connected to your computer, you are now ready to open and use the software that you installed in Chapter 6. For detailed information on using the software, refer to the online help for each application. Opening Mounter Software 1 Double-click the My Computer icon. The My Computer window appears. 2 Double-click the Camera icon. The Camera Memory Card window appears listing individual files.
Starting KODAK Software for Macintosh Computers With the camera connected to your computer, you are now ready to open and use the software that you installed in Chapter 6. For detailed information on using the software, refer to the online help for each application. Opening Picture Transfer Application 1 In the KODAK DC5000 Folder, double-click the Picture Transfer Application folder. The Picture Transfer icon appears. 2 Double-click the Picture Transfer icon. The main Picture Transfer window appears.
Navigating to Your Pictures Pictures are stored on the camera memory card according to a standard agreed upon by many camera manufacturers. This standard allows you to use the camera memory card in different cameras.
8 Tips and Troubleshooting There may be times when questions arise from using your camera. This chapter can point you in the right direction for finding the answers quickly, so you can continue using your camera. Connecting with Your Camera If you are getting messages on your computer that state you are not connected, refer to the PDF documents installed with the software, or the online help for troubleshooting information. If you are connecting to a: q Windows-based Serial connection—refer to Serial.
Getting Better Results from Your Printer You may notice that the colors on your computer screen do not always match those in your documents or prints. This is because monitors and printers use different color systems. You may be able to achieve more predictable results in your printed documents by: q Improving the quality of your paper. Copier paper may not offer the same results as coated paper or paper made especially for inkjet printers. q Adjusting your printer software settings.
Troubleshooting If you are experiencing difficulties with your camera, check the following table for possible solutions. Additional technical information is available in the ReadMe file located in the KODAK DC5000 folder. Computer Monitor Problem Cause Solution The image on your monitor is jagged or inappropriately colored. Monitor is not set correctly. Adjust your monitor display settings. Refer to your computer User’s Guide for details.
Camera Communications Problem Cause Solution Computer cannot Camera power is off. communicate with the camera. Turn on the camera. See page 2. The Mode dial is not set to Connect. Set the Mode dial to Connect. Some Advanced Power Management utilities on laptops can turn off ports to save battery life. See the Power Management section of your laptop User’s Guide to disable this feature.
Camera Problem Cause Ready light does not turn on Batteries are low or and the camera does not work. dead. Camera is not turned on. Red ready light comes on and Batteries are low. camera does not take a picture. Solution Batteries need to be replaced (see page 2), or recharged (see page 3). Also, you could use an AC adapter. Turn on the camera. See page 2. Batteries need to be replaced (see page 2), or recharged (see page 3). Also, you could use an AC adapter. Camera memory card is full.
Camera Problem Cause Solution SHUTTER button does not work. Camera is not turned on. Turn on the camera. See page 2. Mode dial is not set to Set the Mode dial to Capture. Capture. Camera does not turn on. 74 Ready light is blinking. Camera is processing picture. Wait until Ready light stops blinking before attempting to take another picture. The Status Display reads Full. The camera memory card is full.
Camera Problem Cause Solution Part of the picture is missing. Something was blocking the lens when the picture was taken. Keep hands, fingers, or other objects away from the lens when taking pictures. Your eye or the picture was not centered correctly in the viewfinder. Leave space around subject when centering picture in viewfinder. Camera Close-Up is activated without using Preview. Activate Preview when using the CloseUp feature. See page 17. Flash is not on or did not function.
Camera Problem Cause Solution Picture is too light. The flash is not needed. Change to Auto flash. See page 15. Check the flash default setting. See page 51. The subject is too close when the flash was used. Move so there is at least 1.6 ft (0.5 m) between the camera and the subject. The light sensor is covered. Hold the camera so your hands or other objects do not cover the light sensor. The Exposure Compensation is set incorrectly. Decrease the Exposure Compensation. See page 22.
Camera Problem Cause Solution Pictures remaining number does not decrease after taking a picture. The image Resolution and Quality settings does not take up sufficient space to decrease the picture remaining number. The camera is operating normally. Continue taking pictures. Picture is not clear. The lens is dirty. Clean the lens. See page 89. Subject too close when taking picture. Stand at least .82 ft (.25m) in wide angle, 1.6 ft (.5m) in telephoto.
LCD Messages Message Cause Solution Memory Card is Full. Memory card is full and cannot hold additional pictures. Transfer pictures to your computer, delete pictures on the card (see page 39), or insert a card with available memory (see page 5). No Card. There is no memory card inserted in the camera. Insert a memory card into the camera. See page 5. Memory Card is Corrupted/ Unreadable. Memory card is corrupted. Insert a new (see page 5) or reformat the memory card (see page 48).
9 Where to Get Help If you need help with your camera, it is available from a number of resources: q Chapter 8 “Tips and Troubleshooting” q Place of purchase q Software’s manufacturer q World Wide Web q Product information by fax q Technical support Software Help Help with any KODAK software packaged with your camera can be obtained from the online help, or by contacting the manufacturer. Online Services Contact Kodak via: q World Wide Web http://www.kodak.
Customer Support If you have questions concerning the operation of KODAK software or the camera, you should first check the KODAK Service and Support web site at: www.kodak.com. Then, if you need to speak directly to a customer support representative, have the camera serial number ready, and be at your computer when you call. q U.S. and Canada—call toll free, 1-888-375-6325, between the hours of 9:00 a.m. and 8:00 p.m. (Eastern Standard Time) Monday through Friday.
Country Help number Fax Hungary India Ireland Italy Japan Kenya Korea Latin America Lebanon Malaysia Mexico Middle East Netherlands New Zealand Norway Pakistan Panama Peru Philippines Portugal Puerto Rico Russia Singapore South Africa Spain Sweden Switzerland Taiwan Thailand Turkey United Arab Emirates U.K.
10 Warranty and Regulatory Information Warranty Time Period Kodak warrants the KODAK DC5000 Zoom Digital Camera to be free from malfunctions and defects in both materials and workmanship for one year from the date of purchase. Warranty Repair Coverage This warranty will be honored within the geographical location that the product was purchased.
Limitations WARRANTY SERVICE WILL NOT BE PROVIDED WITHOUT DATED PROOF OF PURCHASE. PLEASE RETURN THE WARRANTY REGISTRATION CARD WITHIN 30 DAYS OF PURCHASE. THIS WARRANTY BECOMES NULL AND VOID IF YOU FAIL TO PACK YOUR DC5000 CAMERA IN A MANNER CONSISTENT WITH THE ORIGINAL PRODUCT PACKAGING AND DAMAGE OCCURS DURING PRODUCT SHIPMENT.
Application Support For application specific support, contact your reseller, systems integrator, software manufacturer, or dealer. How to Obtain Service Visit us on the Internet at http://www.kodak.com. Please refer to the Chapter 9 “Where to Get Help” on page 79 for the support number designated to your location. When returning a camera for repair, pack the camera in its original packaging materials. A problem report should also be enclosed with the equipment.
Regulatory Information FCC Compliance and Advisory This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
11 Appendix This appendix serves as a resource for specific technical information and care for your camera, and contains the following information: q Original default settings. q Camera Specifications. q Care and maintenance. q Battery usage guidelines. Original Camera Default Settings Your camera is set to these settings when you take the camera out of the box for the first time.
Camera Specifications DC5000 Camera Sensor Resolution CCD 1901 x 1212 = 2.1 millions of pixels (total number of pixels) Picture Resolution 2.0 millions of pixels High 1760 x 1168=2,055,680 Standard 896 x 592=530,432 Color 24-bit, millions of colors Picture File Format Exif version 2.1 (JPEG base) Picture Storage ATA compatible CompactFlash card Viewfinder Real image ASA/ISO Sensitivity Flash Range Lens 70 Wide 1.6 ft to 9.8 ft (0.5 to 3.0 m) TelePhoto 1.6 ft to 7.9 ft (0.5 to 2.
General Maintenance and Safety q To keep from damaging your camera, do not open the memory card door, battery door, or skylight filter while in harsh environments such as rain, sea air, or windstorms. The seals in these areas prevent exposure to moisture and dirt which can damage your camera. q Always follow basic safety precautions, refer to the “Important Safety Instructions” booklet packed with your camera. q Clean the outside of the camera by wiping with a clean, dry cloth.
q Clean the lens filter cover and back LCD screen: Do not use cleaning solutions unless they are designed specifically for camera lenses. Do not wipe the camera lens or LCD screen with chemically treated eyeglass lens tissue as it may scratch the lens. 1 Blow gently on the lens or LCD screen to remove dust and dirt. 2 Moisten the lens or LCD screen by breathing lightly on it. 3 Wipe the lens or LCD screen gently with a soft, lint-free cloth or an untreated lens-cleaning tissue.
Using Your Batteries q Kodak recommends KODAK Photolife AA Alkaline Batteries, or KODAK Photolife AA Ni-MH Rechargeable Batteries for use in the camera. q Remove the batteries when the camera is stored for extended periods of time. q Always follow your battery manufacturer’s directions fully. Do not attempt to disassemble, short circuit, or subject the battery to high temperature or fire. q Your camera has been designed to operate correctly using a variety of AA-size batteries currently available.
q Battery performance is reduced at temperatures below 32°F (0°C). Carry spare batteries when using your camera in cold weather, and keep them warm until you are ready to take pictures. Do not discard cold batteries that do not work, once warmed, they may be usable. q When disposing of batteries, follow the manufacturer’s instructions and any local and national regulations. Kodak suggests customers take advantage of any community battery recycling programs that may exist in your area.
Index A adapter AC 4 serial 63 adjusting auditory feedback 44 border default 50 borders 23 camera exposure 22 clock 6 date stamp 19 digital zoom 12 effects 24 exposure compensation 22 exposure default 53 flash 15 flash default 51 frames 23 ISO default 55 language 47 LCD brightness 7 metering 28 monitor 69 power save 45 quality 25 resolution 26 response beep 44 sharpness 30 video out 49 white balance 27 white balance default 52 zoom 12 artificial lighting 27 auditory feedback 44 auto flash 15 focus 11 ISO,
C camera information 46 camera language 47 camera memory card formatting 48 inserting and removing 5 logo 5 camera specifications 88 cancelling print order 37 capturing a picture 11 card, camera memory formatting 48 inserting and removing 5 logo 5 care, camera 89 center-weighted metering 28 checking batteries 3 clock, setting 6 close-up 17 CompactFlash card formatting 48 inserting and removing 5 logo 5 compliance, FCC 86 connecting help 69 serial cable, Macintosh computer 63 serial cable, Windows-based comp
camera care 89 communicating with computer 69 connecting 69 customer support numbers 80 fax 79 online service address 79 software 79 troubleshooting 71 warranty 83 high resolution 26 history, camera 46 flash default 51 format memory card 48 infinity focus 16 language 47 magnify 35 metering 28 picture information 41 power save 45 print order 36 protect 38 quality 25 quickview 13 resolution 26 response beep 44 self-timer 18 sharpness 30 slide show 40 video out 49 white balance 27 white balance default 52 ind
L landscape photography 16 language, camera 47 launching the software 65 LCD brightness 7 loading batteries 2 locking an exposure 31 M Macintosh system requirements 57 magnifying pictures 35 maintenance 89 memory bar 34 memory card, camera formatting 48 inserting and removing 5 logo 5 metering center-weighted 28 multi-pattern 28 monitor, adjusting 69 multi-pattern metering 28 N navigating to pictures 67 needle locator, pictures 34 NTSC 49 O opening the software 65 ordering prints 36 P PAL 49 photography
Q quality 25 quickview 13 R red-eye reduction 15 regulatory information 86 repair coverage 83 resolution 26 response beep 44 reviewing pictures 34 RS-232 serial cable 62 S safeguarding pictures 38 safety 89 save power 45 self-timer 18 sepia tone as default 54 pictures 24 serial cable, connecting help 69 Macintosh-based computer 63 Windows-based computer 62 service numbers 80 setting border 23 border default 50 clock 6 close-up 17 date stamp 19 digital zoom 12 effect default 54 effects 24 exposure compensa
T W taking a picture 11 pictures, preparing 2 telephoto, setting wide angle 12 television, viewing pictures 40 thumbnails, viewing 34 tips battery guidelines 91 maintenance 89 monitor setting 69 printing 70 safety 89 troubleshooting 71 tungsten balance 27 warning beep 44 warranty 83 white balance auto 27 daylight 27 default 52 fluorescent 27 tungsten 27 wide angle 12 Windows system requirements 57 U USB symbol 64 USB, connecting help 69 Macintosh computer 64 Windows-based computer 64 V video out 49 out
