Operation Manual

1-4
Setting Up the Printer
Turning On the Printer
Move the power switch to on ( | ).
On the operator panel, the orange Power light illuminates. If paper
and ribbon are loaded, 8x10 YMC-YMC or 8x12 YMC-YMC
appears, depending on the size of ribbon that is loaded.
To turn off the printer, move the power switch to off ( ).
Handling and Storing the Paper and Ribbon
For the best quality prints, carefully handle and store the paper
and ribbons.
• To avoid fingerprints, handle the ribbon by the spool ends and
the paper by the edges. Do not touch the ribbon material or
the glossy sides of the paper.
• Store the paper and ribbons away from direct sunlight, at a
temperature of 30° C (86° F) or lower and a relative humidity
of 60% or lower.
Loading the Paper
Make sure you have the KODAK XTRALIFE Photo Book Paper
D4000 available (see “Printer Supplies” on page A-2).
1. Make sure the power switch is turned on (
| ) and the front
door is closed.
2. If you are:
• loading the paper for the first time, go to step 5.
• replacing the paper, continue with the next step.
3. Press
Rewind/Unload on the operator panel.
4. When
RollBack OK ? appears, press Enter.
Paper Rollback appears, followed by Load Paper.
D400
0 Dupl
e
x Phot
o
Print
e
r
Me
n
u
E
n
t
er
Re
wi
n
d
/
Un
l
o
a
d
A
d
v
a
nc
e
/L
o
ad
Powe
r
Re
ad
y
E
rro
r
Menu
Enter
Rewind/Unload
Advance/Load
34