User manual

ManualsBrandsKodak ManualsDigital CamerasC Daylight

o

VSR-DSVSI,OPMSNT.

Caused by leaving

the

negative too

long

in

the developer.

In

this

case,

the

negative

is

very

strong

and

intense

by

transmitted

light

and

requires

a

very

long

time

to

print.

The

remedy

is

obvious.

UNDSR-DSVSI,OPMSNT.

Caused

by

removal from the developer too soon.

An

undeveloped

negative

differs

from

an

under-exposed

one,

in

that

it

is

apt

to

be

thin

and

full

of

detail,

instead

of

harsh,

and

lacking

in

detail.

If

the

development

is

carried

on

as

before

directed,

this

defect

is

not

liable

to

occur.

SPOTS.

STRSAKS.

STC.

Air

bells

on

the

film in

the

developer

or

fixing

bath

are liable to cause spots;

and

streaks are

caused

by

allowing

the

film to remain

uncovered

in

part

by

the

various solutions while

in

them.

White, milky spots

are

evidence

that

the

negative

has

not

been

properly

fixed,

and

the

negative should

be

put

back

into

the

fixing

bath

and

then

re-washed.