User manual

ManualsBrandsKodak ManualsDigital CamerasC Daylight

box

containing

the

empty

spool.

Use

the

loading

card

to

guide

the

film

into

its place

and

turn

the

key

until

the

spools seat themselves in

their

places.

7.

Replace

and

screw down

the

lid,

and

put

the

holder

in its place

on

the

camera.

8 .

Turn

the

key

until

the film is taut.

9 . Now slide

the

register

and

turn

the

key three times,

the

same as if making

4 exposures.

This

will wind the black

paper

out

of

the

way,

and

bring

the

first film

into

position.

The

register

will now

be

set

at

I.

The

Kodak

is now ready for use again.

The

spool of exposures, well

wrapped

in its box,

can

now be

sent

by

mail

to

the

Eastman

Kodak

Company

for

development

(see

price

list);

but

tht>

kodaker

is

strongly advised to

learn

to develop ltis own negatives, as described in

Part

IV

.

•

IS