User Manual

110
111
3. Press the [ ]/[ ] button to
select「USB」and press the button
to enter the menu.
4. Press the [ ]/[ ] button
to select「Printer」and press the
button to conirm.
USB
TV-System
Printer
NTSC
HDMI CEC Control
Off
Exit
Set
Select
US
B
TV-Syste
m
P
r
i
nter
NTS
C
HDMI
C
E
C
C
ontro
l
Off
E
x
it
S
et
S
elec
t
USB
PC
Printer
After the camera is reset, it will
switch to PC mode automatically
from USB mode.
See “Using the PictBridge Menu“
section on page 112.
PictBridge technology allows printing of
the photos saved in the memory card by
the printer.
To ind out if a printer is PictBridge
compatible, simply look for the PictBridge
logo on the packaging or check the
owner's manual for speciications. With
the PictBridge function on your camera,
you can print the captured photos directly
to a PictBridge compatible printer using
the supplied Micro USB cable, without the
need for a PC.
Setting the USB Mode
The camera’s Micro USB port can be set
to connect with either a PC or a Printer,
the following steps will ensure that the
camera is correctly conigured to connect
with a Printer.
1. Press the button, press the
[ ]/[ ] button to select
and press the button to enter the
menu.
2. Press the [ ]/[ ] button to
select .
Connecting to a PictBridge Compatible Printer