User Manual

76
3. Connect the other end of the cable to an
available USB port on your computer.
4. After the transmission is complete, disconnect
the USB cable according to your computer
manufacturer's instructions specifying how to
safely remove USB devices.
Video System
Use this feature to switch the video system from
either NTSC or PAL.
1. Press the button, press the up/down arrow
buttons to select and press the button to
enter the menu.
2. Press the up/down arrow buttons to select
and press the button or right arrow button to
enter the menu.
3. Press the up/down arrow buttons to select [TV-
System] and press the button or right arrow
button to enter the menu.
4. Press the up/down arrow buttons to select
[NTSC] or [PAL] and press the button to
conirm.