User Manual

35
6. Select [Yes] to save or [No] to cancel.
7. Turn the Mode dial to switch to the custom
settings ( ).
8. The photo settings you stored the last time are
saved.
The factory default settings are Program AE
(
) and other parameters.
Custom Settings only keeps the Photo
Shooting Mode and parameters you set the
last time you used the camera in this mode.
Landscape
While operating in this mode, the camera will
provide vivid reproduction of greens and blues,
adjusting your landscape photos for the best
possible results.
Follow these steps:
1. Use the power switch to turn the camera on.
2. Switch the Mode dial to Landscape ( ).
3. Compose your picture in the LCD and press the
shutter button halfway down to focus on the
subject.
1234
00:56:00
SD
4. The LCD will show a green focus frame when
the subject is in focus.
5. Press the shutter button down all the way to
take pictures.