User manual

AUTOMATIC
AND
MANUAL
/
"'''"'''0"''''
The camera can be set for automatic exposure control for daylight pictures
or
manual exposure control- used primarily for flash pictures. See page
19
.
Automatic
Exposure
Control
Look
into the curved window
on
top
of
the
shutter housing, and note the position
of
the green
POINTER.
If
it points
at
AUTO-
MATIC as shown, the camera
is
set for automatic exposure control-
that
is
, the
size
of
the lens opening
is
now controlled by the over-all brightness
of
the field as
seen
by
the exposure meter.
If
the green pointer
is
not
at
automatic, simply move the
KNURLED
WHEEL
to the right until the green pointer locks
at
automatic. The red EXPOSURE METER
NEEDLE,
also visible through the curved window, will move
to
the right
or
left,
depending
on
the over-all brightness
of
the field as seen by the exposure meter.
When the needle moves to the extreme left
in
the window, it indicates
that
there
is
not sufficient available light
to
take a properly exposed picture. See page
15.