User manual

2 Note the EV number to which the red
exposure needle points.
3 Move
the lock button to the right and,
at the same time, move the knurled wheel
• until the green
pointer is set for this EV
number. The camera is now set manually
for proper exposure of the subject only.
If the principal subject is dark against a
very light
background, follow the same
procedure.
Under certain conditions you may wish
to modify the recommended film index to
achieve results which
are more to your lik-
ing. Using a slightly higher
exposure index
than recommended results in slightly darker
transparencies, which some people prefer
when using a high-wattage
projector and a
small screen.
For example, if 32 is the film
index suggested by
the manufacturer, try a
setting between 32
and 64. A slightly lower
index results in slightly lighter
transparen-
cies, preferred by some people when using
a
lo w- wattage projector and a large screen.