User Guide

25
Customizing roll titles
You can create your own roll title alphabetically
and/or numerically up to sixteen characters.
The camera will store a maximum of nine titles
(see Saved titles ). If you do not enter a title
through “ SAVE A TITLE ,” the camera will
default to “none” after you take a picture.
Titles can be selected with or without film in
the camera.
1. Press the TITLE BUTTON (20) twice. The
TEXT-MESSAGING PANEL (30) will display
“ SET ROLL TITLE .”
2. Press the SELECT BUTTON (23). The text-
messaging panel will display “ NONE.”
3. Press the ZOOM-DIAL LEVER (15) until
“CREATE A TITLE” appears on the text-
messaging panel.
4. Press the select button to activate a
“blinking letter.” Press the zoom-dial lever to
the right or left to increase or decrease the
letter or number.
5. Repress the select button to store the
information and move to the next blinking
position. Repeat steps 4 and 5 until the last
letter inthe title is displayed.
• To create a space between words in the
title, use the character (space) before
the letter A.
6. Press the ENTER BUTTON (22) to complete
the selection.
• After you set the title, the text-messaging
panel will display “ROLL TITLE IS”
followed by the selected title.
Saved titles
This feature will allow you to save customized
print and roll titles. Saved print titles will cancel
after 24 hours and saved roll titles when the
film is fully exposed.
1. Press the TITLE BUTTON (20) repeatedly
until “SAVE A TITLE” appears on the TEXT-
MESSAGING PANEL (30).