User Guide

23
Selecting print titles
1. Press the TITLE BUTTON (20). The TEXT-
MESSAGING PANEL (30) will display “ SET
PRINT TITLE .”
2. Press the SELECT BUTTON (23). The text-
messaging panel will display “ NONE.”
3. Press the ZOOM-DIAL LEVER (15) until “TITLE
LIBRARY” or “SAVED TITLES” appears on
the text-messaging panel.
4. Press the select button to activate the
“blinking” title. Use the zoom-dial lever or the
select button to scroll through the choices
(see Quick-Reference Guide for a complete
list of the titles).
5. Press the ENTER BUTTON (22) to store the
selected title.
• After you set the title, the text-messaging
panel will display “PRINT TITLE IS”
followed by the selected title.
• A print title stays in effect from one print
to the next for 24 hours, then returns
to “none.”
• To immediately cancel a selection, follow
steps 1, 2, and 5.
Customizing print titles
You can create your own print titles alpha-
betically and/or numerically up to sixteen
characters. The camera will store a maximum
of nine titles (see Saved titles) . If you do not
use the “SAVE A TITLE” feature, the camera
will default to “none” after you take a picture.
Titles can be selected with or without film in
the camera.
1. Press the TITLE BUTTON (20). The TEXT-
MESSAGING PANEL (30) will display “ SET
PRINT TITLE .”
2. Press the SELECT BUTTON (23). The text-
messaging panel will display “ NONE.”
3. Press the ZOOM-DIAL LEVER (15) until
“CREATE A TITLE” appears on the text-
messaging panel.