User Guide

20
Using the
Remote Control
The IR Remote Control RC-3 allows remote
camera operation up to 20 ft (6.1 m) away.
1. Place the camera on a tripod (TRIPOD
SOCKET
[24]) or on another firm support.
2. Press the ENTER BUTTON (22) repeatedly
until “REMOTE READY” appears on the
TEXT-MESSAGING PANEL (30).
3. Arrange the camera and subject positions
and compose your picture.
4. Point the REMOTE (8) toward the front of
the camera and press the remote button.
The REMOTE-CONTROL LAMP (7) blinks and
the shutter releases after approximately
3 seconds.
• After you take the picture, the remote
control is canceled.
Changing the remote-control battery
The remote control uses a 3-volt lithium
KODAK KCR2032 (or equivalent) Battery.
Replace the battery
when the remote-
control button does not
release the shutter.
1. Remove the three
screws on the back
of the remote-
control cover.
2. Lift cover and remove
the old battery.
3. Insert a new battery
(+ side up).
4. Replace cover
and re-attach
the screws.