User Guide

13
Loading the Film
You can load film into the camera with the
camera ON or OFF.
1. Turn the camera upside down and
slide the FILM-DOOR LATCH (17) to
open the FILM DOOR (18).
• The film door will open only when the
film chamber is empty or the film in
the camera is completely rewound
into the film cassette.
2. Insert the film cassette completely into the
FILM CHAMBER (19).
• Make sure the
Film Status
Indicator (FSI) on
the film cassette
is at ●
(#1 position) for a
new cassette or
at ◗ (#2 position)
for a partially
exposed cassette.
• Do not force the film cassette into the
film chamber.
3. Close the film door to start the auto-film
advance. The FRAME COUNTER (31) on the
LCD PANEL (16) will show the number of
frames remaining on the film cassette.
• After you close the safety-interlocked film
door, you cannot open the door until the
film is completely rewound into the film
cassette.
LEFT
EXP
OPEN
3
4
2
1