User Guide

11
Attaching the Strap
1. Insert one end of
the strap under the
bottom STRAP
POST
(12).
2. Pull it up
through the
top strap post
and buckle
both ends
together.
Loading the Batteries
This camera uses two 3-volt lithium KODAK
KCR2 (or equivalent)
Batteries that supply
power for all camera
operations.
1. Open the BATTERY
DOOR
(26).
• You can remove and
replace batteries with
the camera on or off.
2. Insert the batteries into
the chamber as shown.
3. Snap the battery door
closed.
• After you load new
batteries into the
camera, you will
need to reset the
date and time.
OPEN