User Guide

TROUBLESHOOTING

What happened Probable cause Solution

Camera will not operate There are no more Remove the film

pictures remaining

Battery weak, dead, missing, Replace or reload the battery

or improperly inserted

Subject closer than Stand beyond 2 ft (0.60 m)

2 ft (0.60 m) from your subject

Focus/flash lamp glows red Subject closer than 2 ft (0.60 m) Move beyond 2 ft (0.60 m)

and shutter button locks from camera until red light disappears

Film does not Battery weak, dead, missing, Replace or reload the battery

advance or rewind or improperly inserted

LCD panel is blank (Flash (see Probable cause above) (see Solution above)

may fire inadvertently)

Film rewinds at beginning of Camera transport or film problem Load another film cassette

film load or middle of cassette into camera

(empty cassette symbol [27]

“blinks” on LCD panel) Call Kodak for assistance

Film door does Loaded exposed, partially

Load only unexposed film

not close exposed, or processed film into the camera

in the camera

All LCD indicators "blink" Camera mechanism problem Press shutter button, turn the

camera off and on, or replace

or reload the battery