Environmental information • The Kodak A4 Flatbed Accessory and Kodak A3 Flatbed Accessory is designed to meet worldwide environmental requirements. • Guidelines are available for the disposal of consumable items that are replaced during maintenance or service; follow local regulations or contact Kodak locally for more information. • Disposal of this material may be regulated due to environmental considerations.
Japan This is a Class A product based on the standard of the Voluntary Control Council for interference by information Technology Equipment (VCCI). If this is used in a domestic environment, radio disturbance may arise. When such trouble occurs, the user may be required to take corrective actions. Taiwan WARNING: This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.
Using the Kodak A3/A4 Flatbed Accessory The Kodak A3 Flatbed Accessory and Kodak A4 Flatbed Accessory give you the ability to scan exception documents with your Kodak Scanners that are designed to use the flatbed. The cable included with the A3/A4 Flatbed Accessory easily connects your flatbed to the scanner. NOTE: These instructions apply to all scanner models, unless otherwise noted. The photos in this publication may vary slightly depending on your scanner model.
Installing the flatbed 1. Power down the scanner. 2. Attach one end of the cable to the flatbed. 3. Attach the other end of the cable to the scanner. 4. Turn on the scanner. If the flatbed is being connected for the first time, wait for the PC to find and install the device drivers for the flatbed. When the LED on the flatbed is green and steady, the flatbed is ready to use.
LEDs and Start button You can scan a document using the Start button on the flatbed. • For scanners with a Start button on the control panel: When you press the Start button on the flatbed, you will get the same result as pressing the Start button on the scanner. The application that is associated with the displayed number in the function window is launched. By default, the displayed numbers are associated with smart touch. The displayed numbers 1-9 are mapped to smart touch task shortcuts 1-9.
Using the flatbed Use the flatbed to scan documents that cannot be scanned using the automatic document feeder (ADF). 1. Open the flatbed cover. 2. Place the document face down on the glass platen. 3. Align the document in the lower right-hand corner at the corner arrows. 4. Close the flatbed cover. 5. Start scanning. You can scan the document using the Start button on the flatbed or scanner; or use the desired application.
Using Manual cropping modes If you are scanning from the flatbed and you have Manually select as the cropping mode, start with your crop in the upper left-hand corner (Origin position should be 0,0) and be sure your document is properly positioned in the lower right-hand corner of the flatbed. NOTES: • To help you manually crop your document, click Preview and make any adjustments as necessary. • When using the automatic document feeder, the scanner automatically centers your document.
Cleaning the flatbed The flatbed’s glass platen can collect fingerprints and dust. Use Staticide Wipes for Kodak Scanners (CAT No. 896 5519) and the Optics Cleaner pad (CAT No. 868 3724) to clean the glass platen. IMPORTANT: Staticide wipes contain isopropanol which can cause eye irritation and dry skin. Wash your hands with soap and water after performing maintenance procedures. Refer to the MSDS for more information. 1. Open the flatbed cover. 2. Wipe the glass platen with a Staticide wipe. 3.
Changing or replacing the background cover To change the cover of the A4 Flatbed or use the Black Background Accessory: • Use both hands to press the hinges to release the cover. Lift and remove it from the flatbed. If you need to replace or remove the A3 Flatbed cover: • Use both hands to lift the cover straight up and away from the flatbed.
