Owner manual

2-4 A-61628 December 2011
LDAP Settings (continued)
Return Email
Address
This is the address that bounced
emails are returned to (e.g.,
[e-mail]). This
address will also appear as the
default “From” address when
sending email.
Select a person who will receive
notification that an email address
could not be reached.
Maximum
Attachment Size
1-99 MB
Default: 99 MB
Email operations that create files
larger than this will fail. This should
match the limitations defined by
your email server.
Fax Settings — found under the Settings button in the Configuration Organizer or Scan
Station when using the KSS500 - Scanner Admin application.
Parameter Name Description/Sample Your Setting Notes
LDAP Fax Field Tag May be used to search for fax
numbers stored in a corporate
address box.
This field is not required.
Sender’s Fax Number
This field is informational.
Outside Line Prefix
The prefix a user needs to access
an outside line.
A comma may be used to insert a
“pause”.
Modem Country Code
Displays a list of associated codes
that configure the modem for use in
the selected country.
Incoming Fax Settings
Configures your Scan Station to
receive incoming faxes.
• This option is only available if the
administrator’s Email ID is
configured.
• See Chapter 3 for more detailed
information.
• Incoming Fax Folder
Enter a fully qualified path name to
a network folder where faxes will
be delivered.
• Incoming Fax
Printer
Select a network printer for
incoming fax delivery.
• Receive Fax
Allows faxes to be received at the
configured device.
Fax Notification
Enable to receive “success” or
“failure” notification when a fax is
sent.
• Retries
The number of times the Scan
Station will attempt to send a fax.
• Retry Delay
The number of minutes the Scan
Station will wait between attempts
to send a fax.