Owner manual

A-61628 December 2011 2-3
Email Server Settings — found under the Settings button in the Configuration Organizer or
Scan Station when using the KSS500 - Scanner Admin application.
Parameter Name Description/Sample Your Setting Notes
SMTP Settings
• Server Address
Fully qualified domain name or
IPv4 address of the SMTP server
(e.g., smtp-server.
company.com or 192.0.0.1).
Use IPv4 to eliminate any DNS issues
when troubleshooting.
• Credentials
User name, password and network
domain. Required to access the
SMTP server.
Required for authenticated SMTP.
NOTE: This is not necessarily the
same as the credentials defined
under Device Settings.
•Port
Default: 25 Only change if your email server
communicates on an IP port that is
not Port 25.
•TSL
Transport Layer Security
• SSL
Secure Socket Layer Typically unchecked. Check only if
you are sure your email server
requires it.
• Authentication
Scheme
The specific SMTP Authentication
Scheme used by your mail server.
Contact your corporate LAN
administrator for more details on this
setting.
LDAP Settings
• Server Address
Fully qualified domain name or
IPv4 address of the LDAP server
(e.g., ldap-server.
company.com or 192.0.0.1).
Use IPv4 to eliminate any DNS issues
when troubleshooting.
• Credentials
User name, password and network
domain. Required to access the
LDAP server.
Required for authenticated LDAP.
NOTE: This is not necessarily the
same as the credentials defined
under Device Settings.
•Port
Default: 389 Only change if your LDAP server
communicates on an IP port that is
not Port 389.
•Base DN
Base Distinguished Name
Contact your corporate LAN
administrator for more details on this
setting.
• Search Field Tag
Default: sn
• Email Address Tag
Default: email
• Full Name Field Tag
Default: display name
• Search Results to
Return
The maximum number of records
to display (1 to 1000) when
performing a search.
Default: 50
• Security Options
Allows you to set the Security Type
and/or Certificate.