User Manual
Table Of Contents
- Kodak EasyShare P850 zoom digital camera
- Product features
- Table of contents
- Setting up your camera
- Taking pictures and videos
- Transferring and printing pictures
- Doing more with your camera
- Picture-taking modes
- Using the focus button
- Using the drive mode for self-timer, burst, exposure bracketing
- Using the AE/AF button
- Using the program button
- Changing the flash settings
- PASM and C1, C2, C3 modes
- Using the command dial for rapid setting changes
- Using the histogram
- Using highlight/shadow clipping
- Changing picture-taking settings
- Editing functions for Still and Video
- RAW file development
- Viewing picture/video information
- Copying pictures and videos
- Running a slide show
- Pre-tagging for album names
- Sharing your pictures
- Troubleshooting
- Getting help
- Appendix
- Index
Troubleshooting
www.kodak.com/go/support
71
Picture quality problems
If... Try one or more of the following
Picture is too dark
or underexposed
■ Reposition camera for more available light.
■ Use Fill flash (page 36) or change your position so light is not behind
the subject.
■ Move so that the distance between you and the subject is within the
effective flash range (page 10).
■ To automatically set exposure and focus, press the Shutter button
halfway and hold. When the AF/AE indicator turns green, press
the Shutter button completely down to take the picture.
■ Use P mode to adjust the Exposure and Flash Compensations
(page 22).
■ Use P mode (page 22) and Selectable Zone (see AF Zone on
page 33).
Picture is too light
or overexposed
■ Reposition camera to reduce the amount of available light.
■ Turn flash off (page 10).
■ Move so that the distance between you and the subject is within the
effective flash range (page 10).
■ To automatically set exposure and focus, press the Shutter button
halfway and hold. When the AF/AE indicator turns green, press
the Shutter button completely down to take the picture.
■ Use P mode to adjust the Exposure and Flash Compensations
(page 22).