User Manual

Doing more with your camera
www.kodak.com/go/support
51
AF Control
Choose an auto-focus setting.
This setting is kept across PASM
and C until you change it.
Continuous AF (default)—uses external AF
sensor and TTL-AF (Through-The-Lens). Because the
camera is always focusing, there is no need to press
the Shutter button halfway down to focus.
Single AF —uses external AF sensor and
TTL-AF when the Shutter button is pressed halfway
down.
AF Zone
Select a large or concentrated
area of focus.
This setting is kept across PASM
and independently in C1, C2,
and C3 until you change it.
Multi Zone (default) —evaluates 3 zones to give
an even picture focus. Ideal for general
picture-taking.
Center Zone —evaluates the small area centered in
the viewfinder. Ideal when precise focus of a specific
area in the picture is needed.
Selectable Zone —use to move the
to any of 25 focus zones (5 vertical, 5 horizontal).
Sharpness
This setting is kept across PASM
and independently in C1, C2,
and C3 until you change it.
High
Normal
Low
Contrast
This setting is kept across PASM
and independently in C1, C2,
and C3 until you change it.
High
Normal
Low
Setting Icon Options that appear in Liveview