Instructions

6
If there is dust, sand or other foreign materials on
the waterproof rubber of the battery cover and its
contact surface, please wipe it with a clean, dry
and lint free cloth as soon as possible.
Before using the product underwater, make sure
that there is no damage to or foreign debris on
the waterproof rubber gasket. Then close the
battery cover tightly to ensure the waterproof
capability of the product.
Waterproof rubber with scratches and cracks
will allow water to penetrate into the product.
Contact customer service immediately
for maintenance with replacement of new
waterproof rubber.
SAFETY NOTES
Waterproof / Dustproof / Shockproof
JIS / IEC waterproof grade 8 (IPX8).
JIS / IEC dustproof grade 6 (IP6X).
Height for shockproof rating is 2m (6.6 feet).
Waterprooing Notes:
Do not use the product below 15 meters (49.2
feet) underwater. The product can remain
waterproof for one hour at the depth of 15m
(49.2 feet).
Do not use this product in a geothermal spring
or in water at a temperature greater than 40 °C
(104°F).
Please do not open the battery cover
underwater.
If water accidentally comes in contact with the
product, please do not open the battery cover.
Turn the product o, and dry it with a clean, dry
and lint free cloth. Then open the battery cover,
and remove the battery and the memory card.
When opening the battery cover, if there are
water drops on the contact surface between
the inside of the battery cover and the body,
please dry the water drops.
After using the product in water or near sand,
mud or other foreign materials, please rinse it
with clean water (close the battery cover before
cleaning). After cleaning, dry the product with a
clean, dry and lint free cloth.
Waterproof Rubber