Instruction Manual

page 3
1
3
2
1. Plug the charging cable into a powered USB outlet
such as a PC or mobile phone charger. The LED will
glow GREEN when connected to a USB outlet.
3. When the LiPo battery is fully charged, the charging
cable LED will glow GREEN. Charging time for a fully
discharged battery is approximately 60 minutes.
2. Plug the battery connector into the connector on the
charging cable. The LED on the charging cable will
glow RED to indicate charging in progress.
In extremely rare circumstances, there may be a risk of a battery leaking fluids that can cause a chemical burn injury
or ruin your product. To avoid battery leakage:
Non-rechargeable batteries are NOT to be recharged.
Rechargeable LiPo batteries are to be removed from the product before charging.
Rechargeable LiPo batteries are only to be charged under adult supervision.
You MUST charge the LiPo battery in a safe area away from any flammable materials.
NEVER charge the battery unattended at any time. When charging the battery, remain in constant observation of
the battery to monitor the process and react immediately to any potential problems.
• DONOTexposebatteriestoextremeheatorre,batteriesmayleakorexplode.
DO NOT short-circut the supply terminals.
DO NOT drop or subject to strong impact.
DO NOT allow the battery to get wet.
Only charge the battery with the included battery charging cable.
Dispose of batteries properly.
BATTERY SAFETY PRECAUTIONS
CHARGING THE LiPo BATTERY PACK
BATTERY INFORMATION