Instruction Manual

page 2
1
1 2
3
2
4
A
B
1. (A) Press the button at the bottom of the Controller
handle to release the Battery Cartridge.
(B) Insert 4 x AAA batteries (not included).
Ensure that the positive and negative polarities
match the illustration inside the Battery Cartridge.
2. Slide the Battery Cartridge back into the Controller
until it *clicks* into place.
1. Lay the REAL RACER™ Car down so that the Battery
Compartment faces upwards.
2. Using a Phillips screwdriver (not included), remove
the screw on the Battery Compartment Cover.
3. Connect the battery connectors together and insert
the Rechargeable LiPo Battery Pack (included) into
the Battery Compartment.
4. Replace the Battery Compartment Cover and tighten
screw using the screwdriver. Do not over-tighten.
POWERING REAL RACER™
INSTALLING THE LiPo BATTERY PACK
REPLACING BATTERIES IN THE CONTROLLER