SDS

Safety Data Sheet
Date of Issue: August 5
th
, 2019 File No.: FYKJ20190726WERCS01
3. Composition/ Information on Ingredients
Chemical Name Molecular formula CAS No. Weigh%
Lithium cobaltate LiCoO
2
12190-79-3 43.87
Polyvinylidene Fluoride (C
2
H
2
F
2
)
n
24937-79-9 0.82
Aluminum Al 7429-90-5 3.78
Graphite C
24
X
12
7782-42-5 23.37
Styrene Butadiene Rubber C
36
H
42
X
2
61789-96-6 0.99
Cellulose CM C
8
H
16
O
8
9000-11-7 0.42
Copper Cu 7440-50-8 8.12
Nickel Ni 7440-02-0 0.39
Lithium Hexafluorophosphate LiPF
6
21324-40-3 13.56
Polyethylene (C
2
H
4
)
n
9002-88-4 2.61
NYLON 12 C
36
H
69
N
3
O
3
X
2
24937-16-4 2.07
4. First Aid Measures
4.1 General Advice
First aid isupon rupture of sealed battery.
4.1.1 Eye contact
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Keep
eye wide open while rinsing. Remove contact lenses, if present and easy to do. Continue
rinsing. Do not rub affected area. Seek immediate medical attention/advice.
4.1.2 Skin Contact
Wash off immediately with plenty of water and soap for at least 15 minutes. Remove and
isolate contaminated clothing and shoes. Get medical attention if irritation develops and
persists.
4.1.3 Inhalation of Vented Gas
Remove to fresh air. Get medical attention immediately if symptoms occur. If not breathing,
give artificial respiration. If breathing is difficult, (trained personnel should) give oxygen.
4.1.4 Ingestion
Do NOT induce vomiting. Rinse mouth immediately and drink plenty of water. Never give
anything by mouth to an unconscious person. Call a physician or poison control center
immediately.
4.1.5 Self-protection of the first aider
Ensure that medical personnel are aware of the material(s) involved. Take precaution to
protect themselves and prevent spread of contamination. Avoid contact with skin, eyes or
clothing. Avoid direct contact with skin. Use barrier to give mouth-to-mouth resuscitation. Use
personnel protective equipment as required. Wear personnel protective clothing (see
Page3 of 12