Quick Guide

PRODUCT INTRODUCTION
Power Button
Short Press: Light the screen, lock the screen.
Long press: In shutdown state, long press 2-3 seconds to turn on;
When in use, press 2-3 seconds for a long time, and you can cho-
ose to Power off, Restart or Screenshot.
In the crash state, long press 10 seconds to restart automatically.
Left and right scan button
Open the scan code app, short press the scan button to achieve
the scan code function.
Scanner
Scanning recognition of Barcode and QRcode can be carried out
by using scanning dock when scanning function is turned on.
Extend pins
To connect to dock. (Need to buy dock separately)
Type-C USB
Used For device charging,and you can also plug in OTG.
Headphone
Insert a wired headset, and the sound will be switched from the
speaker to the headset.
MIC
Used to make phone calls, video and voice conversations.
Speaker
Used For listening to music or sound amplification.
Receiver
Used to make calls to receive sound.
Indicator Light
Android Charging and Notification Indicator Lamp (Breathing
Lamp) ( Red, Green).
SD card slot and two Nano SIM card slot
Used for inserting the SIM Card and SD Card slot.
Rear camera and Front camera
Supports photographing and 1D/2D code quick scanning.
TECHNICAL INDICATORS OF PRODUCTS
• Android 10
• Quad core 1.8GHz
• LTE/UMTS/GSM/WIFI 2.4&5G/Bluetooth
• 2GB RAM, 16GB ROM
• LCD/CTP：4.0WVGA
• Scanner: E3
• Bluetooth 5.0
• Rear camera：8M AF ，Front camera：2M FF
FCC Regulations:
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and,if not installed and used in accordance with the
instructions, may cause harmful interference to radio communica-
tions. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
`
determined by turning the equipment off and on,the user is encou-
raged to try to correct the interference by one or more of the
following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
—Consult the dealer or an experienced radio/ TV technician for
help.
Radio Frequency (RF) Energy
This device is designed and manufactured not to exceed the
emission limits for exposure to radio frequency (RF) energy set by
`
the Federal Communications Commission of the United States.
The exposure standard for wireless devices employing a unit of
measurement is known as the Specific Absorption Rate, or SAR.
The SAR limit recommended by the general public is 1.6W/kg.
Averaged over one gram of tissue by IEEE Std 1528.
While there may be differences between the SAR levels of various
product and at various positions, they all meet the government
requirements.