Quick Guide

Product Diagram
NFC Card Reader
NFC antenna locates at the bottom of the screen and on the printer
cover. It’s used to sense chip and acquire data through contactless
way.
IC Card Reader
Used for inserting the bank chip card and getting information securely.
Magnetic Stripe Card Reader
Used for reading encrypt information stored in corresponding cards.
Camera
Used for taking photos, unlock the device by face recognition and
complete intelligent recognition base on it.
Scanner
Used to capture and identify 1D and 2D code.
Power Button
Used for change the running states of device, such as pressing 2~3
seconds to power on/off or screen capture and pressing 10 seconds
to restart automatically when device is crashed.
Function Button
Used for adjusting the volume or serving as the shortcut of scan.
The function can be customized.
Pogo pin
The 8-pins expanded interface is severed as the channel to connect the
charging cradle for better power supply or finish data transmission
between different devices.
Hand Stripe Ring
Used to fix the hand strap for easy carrying.
Card Selection Instruction
Printer instructions
1) Support 2 inch thermal paper roll with specification of 57*40mm (w*φ)
2) Feed the paper correctly into the paper container in the direction as
shown, and pull some paper outside the cutter;
Note: If the printed paper is blank, please check whether the pap-er roll
has been installed in the correct direction.
Package List
NO.
Items list
Description
1
Device
Default
2
Battery
1pcs,2500mAh/7.6V
3
USB cable
1pcs,1m/2A/type-c
4
User manual
Neutral