Quick Guide

Technical Specs
ATTENTION
arning
Read all instructions and safety information before use to avoid injury.
The limit operating ambient temperature of the device declared by
the manufacturer is -10~45°C.
attery safety
Charge battery only at ambient temperatures ranging from 0~40°C.
Dispose of used batteries according to manufacturer’s instructions.
Danger of explosion if battery is incorrectly replaced. Replace only
with the same or equivalent type of batt
ery reco
mmended by the
manufacturer.
atement
The equipment damage caused by natural disasters, falling, self
disassembly and non-compliance with the operation specifications is
not covered by the free warranty.
Some details of this document may be inconsistent with the real
object due to the update iteration of the product. Please take the real
object as the standard, and our company reserves the right to
interpret this document.
P12
Quick Guide
Items Specification
Operating System Android 11.0 go
CPU Quad-core@1.5Ghz
Memory 1GB RAM + 8GB ROM (LPDDR3)
Display 4.0” IPS, 480*480
Camera 2M FF(front)
Scanner N/A
Cellular Network Support 2g/3g/4g
WIFI IEEE 802.11 a/b/g/n（2.4G&5G）
Bluetooth Version 4.2, support BLE
Payment Support IC/NFC Card
Interface USB type-C、Pogo Pin
Audio Speaker
Battery 1700mAh/3.85V (Rated capacity)
W


B



St


NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
RF Exposure Information:
FCC RF Exposure requirements: The highest SAR value reported under this standard during
product certification for use next to the Body with the minimum separation distance of 0mm.
This transmitter must not be collocated or operating in conjunction with any other antenna or
transmitter.
This product is compliance to FCC RF Exposure requirements and refers to FCC website
https://apps.fcc.gov/oetcf/eas/reports/GenericSearch.cfm search for FCC ID: 2A2UU-P12
All transmission frequencies of U-NII-1,U-NII-2A and U-NII-3 comply with 47 CFR FCC
Part15.407(g) and the manufacturer declares that their transmission is maintained within the
U-NII-1, U-NII-2A and U-NII-3 bands.