Hipstreet Mini Wireless Keyboard and Touchpad Thank you for purchasing this Hipstreet product.
Included · Mini Wireless Keyboard with Touchpad · 2.4GHz Wireless Receiver (Dongle) · User Manual · Mini-USB Charging Cable Specifications Receiver (dongle): Nano style Connection port: USB2.0 or higher Transmission mode: GFSK 2.4GHz wireless, up to 10 meters Transmission Power: Less than +4db Power supply: Rechargeable polymer Lithium-ion battery Charging voltage: 4.4V ~ 5.25V Charging current: 300mA Sleeping current class1: 30uA Operation voltage: 3.
keyboard to power it on. The keyboard will install automatically. No further actions are required – you are now ready to use your keyboard! Note：The included Mini-USB cable can only be used for charging the Keyboard. Touchpad This touchpad supports multi-finger functions. (1) Left click is achieved by a single finger tap on the touchpad. (2) Right click is achieved by a simultaneous two finger tap on the touchpad. (3) To Scroll down on a page, drag two downwards/upwards simultaneously on the touchpad.
Enabling the Backlight Feature To enable the backlight LEDs, press the button. The backlight LEDs will turn ON. The backlight LEDs will turn off automatically when the keyboard goes into auto sleep mode. If a any key is pressed to wake the keyboard back up, the backlight LEDs will also turn back ON. Charging the Internal Battery The device uses a built-in lithium-ion battery. Please use only the included mini-USB charging cable. Note: Fully charge the Keyboard before initial operation.
rechargeable battery. Doing so will void the warranty. · The battery will discharge when it is stored for a long time without operation. · Do not expose the device to extreme heat or cold environments; this will shorten the battery life. PRODUCT AND BATTERY DISPOSAL This product contains a built-in lithium battery and should not be disposed of in normal household waste. The battery in this device is not intended to be removed by the individual or end user.
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help.
