Manual

9
Light Control
Press button to turn LED lights ON and OFF.
The LED lights have 4 brightness levels, ranging from 1 to 4 (1 being the lowest and 4 being the
brightest). Press and hold down button to increase the brightness by 1 level every 3
seconds. The level you use will be the same the next time you turn on the lights.
If you press and hold down button to increase the brightness level again, it will start at the
lowest level and increase by 1 level every 3 seconds.
Lights are controlled independently from Power Control and delay shutoff. Turning the power off
will not turn the lights off.
Baffle Filter Indicator
After hood usage has reached 30 hours, LED Display will show a “C” to indicate that the baffle
filters need to be cleaned. The “C” will keep flashing until it is turned off. To turn it off, please
clean the baffle filters first then turn off the indicator by pressing and holding for 3 seconds.
The “C” will disappear and a new cycle starts.
The cycle is preset for 30 hours. If the baffle filters are cleaned before the end of the 30 hour
cycle, press and hold for 3 seconds and the timer will be reset.